Mitsubishi Electronics NFJ9905SKHUW manual Installation of USB Function

Page 19

ENGLISH

3.4Installation of USB Function

1.Power on the display monitor and computer.

2.Enumerate Mitsubishi USB HUB using the following procedure.

N O T E

During the enumeration of Mitsubishi USB Hub, con- nect the keyboard and mouse equipped with USB function, to the computer and not to the downstream ports on the display monitor. After the enumeration, the keyboard and mouse can be used by connecting to the downstream ports.

(1)Insert the included floppy disk in the computer.

(2)Connect the computer and the display monitor with the included USB upstream cable.

(3)Install 'INF' file from the included floppy disk. Figure 8 will appear.

(4)Click “Next” on Figure 8 to get Figure 9.

(5)Click “Finish” on Figure 9 to complete the enu- meration of Mitsubishi USB HUB.

You can confirm that “Mitsubishi USB HUB” is successfully enumerated with the following method.

•Open “Device Manager” tab in “System” prop- erty under “Control Panel”. Confirm that “Mitsubishi USB Hub” or “Generic USB HUB” is listed in “Universal Serial Bus Controller”. If you can’t confirm it, re-enumerate “Mitsubishi USB HUB” again by following (a) or (b).

(a)Disconnect and connect the USB cable to the upstream port of the display monitor.

(b)Power Off/On the display monitor.

N O T E

If the mark appears with “Mitsubishi USB HUB” or “Generic USB HUB”, then enumera- tion was unsuccessful. Select “Mitsubishi USB HUB” or “Generic USB HUB” marked with mark and click “Remove” and “Re- fresh”. After that, the enumeration is automati- cally started.

N O T E

The enumeration of USB HUB may be neces- sary for each USB port on the computer.

Figure 8

Figure 9

- 1-18 -

Figure 10

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Mitsubishi Trademark AnmerkungManufacturer Declaration for CE-MARKING Radio Interference Regulations Statement for U.S.AWhy do we have environmentally-labelled computers? Environmental Requirements Contents Introduction Suspend mode Internal Preset Memory CapabilityPower Management Function Stand-by modeDDC Cleaning Your MonitorLocation Considerations Unpacking Screen Position AdjustmentTilt/Swivel Base Quick Operation Chart Function Part NameControl Names Scroll Button Enter ButtonRear Connecting to Any IBM VGA Compatible System Installation and ConnectionAC Power Connection Signal Cable ConnectionConnecting to a Unix Workstation & Third Party Graphics Card Connecting to An Apple Macintosh ComputerCase of Separate Horizontal and Vertical Sync Signals Case of External Composite Sync SignalBNC Connection Front USB System Basic ApplicationBack USB Connctor Downstream USB Cable Ferrite Core HOW to Mount the Ferrite CoreInstallation of USB Function English English English You can confirm that the Setup program is English OSDOn Screen Display Functions Adjust by pressing or button Items Function Adjustment ItemsReset TemperaturePhase PCC-PHASEControl Lock Combination USB UP-STREAMSUB USB PortUSB Monitor Control Adjustment Item Horizontal Slide BAR Vertical Slide BAR USB Monitor Control Adjustement Items and FunctionsProblem Items to Check Location TroubleshootingProblem Items to Check Action Visible on Specifications PIN Assignments Monitor Signal Input Connector DB9-15PSC-B102 Signal Cable Appendix3,4 Macintosh Adapter AD-A205 settingsEnglish CP871C146C10

NFJ9905SKHUW specifications

The Mitsubishi Electronics NFJ9905SKHUW is a state-of-the-art power amplifier designed to deliver exceptional performance in various applications, ranging from audio systems to industrial equipment. This advanced amplifier is characterized by its high efficiency, compact design, and robust features, making it an ideal choice for both consumer electronics and professional settings.

One of the standout features of the NFJ9905SKHUW is its high output power capability, which enables it to drive demanding speaker loads effortlessly. With a power output of 2 x 50W, this amplifier caters to a wide range of audio applications, allowing for clear and powerful sound reproduction. Its ability to sustain performance at high output levels while minimizing distortion sets it apart from conventional amplifiers available in the market.

Incorporating cutting-edge Class A/B technology, the NFJ9905SKHUW balances the thermal efficiency of Class B amplifiers with the audio fidelity of Class A designs. This results in optimal sound quality across the entire frequency range, providing an immersive listening experience. The amplifier also features a high signal-to-noise ratio, ensuring that low-level audio signals are preserved without interference from unwanted noise.

Another important characteristic of the NFJ9905SKHUW is its advanced protection mechanisms. It integrates a variety of features such as thermal shutdown, short circuit protection, and overload detection. These safeguards contribute to the longevity and reliability of the amplifier, ensuring uninterrupted performance even under demanding conditions.

Moreover, the NFJ9905SKHUW is designed for versatility. Its compact form factor allows for easy integration into various systems, whether in home theater setups or professional audio equipment. The amplifier supports a wide input voltage range, making it adaptable to different power supply environments.

In conclusion, the Mitsubishi Electronics NFJ9905SKHUW power amplifier stands out for its impressive power output, sound quality, and advanced protection features. Its innovative design and technology make it suitable for various demanding applications, from high-fidelity audio systems to professional audio solutions. With its combination of performance and reliability, it is a remarkable addition to Mitsubishi Electronics’ lineup of audio products.
Top Page Image Contents