English

(4)Click “CD-ROM Drive(C)” and “(L)”, and click “Next”. Figure 14 will appear.

(5)Click “Finish” on Figure 14 and Figure 15 will appear. Click “OK” on Figure 15 to complete Enumeration of Mitsubishi Moni- tor Function.

You can confirm that Enumeration of Mitsubishi Monitor Function is successfull with the follow- ing method.

•Open “Device Manager” tab in “System” property under “Control Panel”. Confirm that “HID-compliant Device” and “USB Human Interface Device (or Mitsubishi USB Monitor)” are listed in “Human Interface Device”. If you can’t confirm it, re-enumer- ate “Mitsubishi Monitor Function” again by following (a) or (b).

(a)Disconnect and connect the USB cable to the upstream port of the display monitor.

(b)Power Off/On the display monitor.

N O T E

If the mark appears with “HID-Compliant Device” and/or “USB Human Interface Device (or Mitsubishi USB Monitor)”, the enumeration was unsuccessful. Select “HID-Compliant Device “and/or “USB Hu- man Interface Device (or Mitsubishi USB Monitor) marked with mark and click “Remove” and “Refresh”. After that, the enumeration is automatically started.

Figure 14

Figure 15

- 1-20 -

Figure 16

NFJ9905SKHUW specifications

The Mitsubishi Electronics NFJ9905SKHUW is a state-of-the-art power amplifier designed to deliver exceptional performance in various applications, ranging from audio systems to industrial equipment. This advanced amplifier is characterized by its high efficiency, compact design, and robust features, making it an ideal choice for both consumer electronics and professional settings.

One of the standout features of the NFJ9905SKHUW is its high output power capability, which enables it to drive demanding speaker loads effortlessly. With a power output of 2 x 50W, this amplifier caters to a wide range of audio applications, allowing for clear and powerful sound reproduction. Its ability to sustain performance at high output levels while minimizing distortion sets it apart from conventional amplifiers available in the market.

Incorporating cutting-edge Class A/B technology, the NFJ9905SKHUW balances the thermal efficiency of Class B amplifiers with the audio fidelity of Class A designs. This results in optimal sound quality across the entire frequency range, providing an immersive listening experience. The amplifier also features a high signal-to-noise ratio, ensuring that low-level audio signals are preserved without interference from unwanted noise.

Another important characteristic of the NFJ9905SKHUW is its advanced protection mechanisms. It integrates a variety of features such as thermal shutdown, short circuit protection, and overload detection. These safeguards contribute to the longevity and reliability of the amplifier, ensuring uninterrupted performance even under demanding conditions.

Moreover, the NFJ9905SKHUW is designed for versatility. Its compact form factor allows for easy integration into various systems, whether in home theater setups or professional audio equipment. The amplifier supports a wide input voltage range, making it adaptable to different power supply environments.

In conclusion, the Mitsubishi Electronics NFJ9905SKHUW power amplifier stands out for its impressive power output, sound quality, and advanced protection features. Its innovative design and technology make it suitable for various demanding applications, from high-fidelity audio systems to professional audio solutions. With its combination of performance and reliability, it is a remarkable addition to Mitsubishi Electronics’ lineup of audio products.