Mitsubishi Electronics MDT321S OSD Position, Input Detect, Monitor, Information, English-24

	CONFIGURATION 2					The OSD control menu will stay on as long as it is use.
	LONG CABLE MANUAL	OSD TURN OFF				In the OSD Turn Off submenu, you can select how long
	OSD TURN OFF
OSD TURN OFF	INFORMATION OSD					the monitor waits after the last touch of a button to shut
	OFF TIMER			10 SEC.
	OSD POSITION
	INPUT DETECT		+ -:ADJ	EXIT :RETURN MENU :EXIT MENU		off the OSD control menu. The preset choices are
	MONITOR INFORMATION
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU					10 -240 seconds.
	CONFIGURATION 2					Selects the information OSD display or not. The
	LONG CABLE MANUAL	INFORMATION OSD				information OSD will display when input signal or
	OSD TURN OFF
INFORMATION OSD	INFORMATION OSD		ON		10 SEC.	source change or warning message like as no-signal or
	OSD POSITION		OFF
	OFF TIMER
	INPUT DETECT	:SEL + -:ADJ		EXIT	:RETURN	out-of range.
	MONITOR INFORMATION
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU					A time between 3 to 10 seconds is available.
						To select OFF TIMER mode ON/OFF.
	CONFIGURATION 2					In the OFF TIMER menu, you can preset the monitor to
	LONG CABLE MANUAL	OFF TIMER
	OSD TURN OFF					automatically power down.
	OFF TIMER
OFF TIMER	INFORMATION OSD		ON	1	HOUR
	OSD POSITION		OFF			A time between 1 to 24 hours is available.
	INPUT DETECT
	MONITOR INFORMATION
		:SEL + -:ADJ		EXIT :RETURN		When the OFF TIMER is set, the SCHEDULE
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
						(see page 26) settings will be disabled.

	CONFIGURATION 2	OSD POSITION
	LONG CABLE MANUAL	H POSITION
	OSD TURN OFF
OSD POSITION	INFORMATION OSD		50
	OSD POSITION	V POSITION
			Adjusts the position of the OSD menu.
	OFF TIMER
	INPUT DETECT		70
	MONITOR INFORMATION

:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU :SEL + -:ADJEXIT :RETURN

					Selects the method of input detection when more than
					two computers are connected.
					FIRST DETECT: When the current video input signal is
					not present, then the monitor searches for a video signal
					from the other video input port. If the video signal is
					present in the other port, then the monitor switches the
					video source input port to the new found video source
					automatically. The monitor will not look for other video
					signals while the current video source is present.
					This function is available at input RGB 1/2/3.
					LAST DETECT: When the monitor is displaying a signal
	CONFIGURATION 2				from the current source and a new secondary source is
	LONG CABLE MANUAL	INPUT DETECT
	OSD TURN OFF		LAST	DETECT	supplied to the monitor, the monitor will automatically
	OFF TIMER
INPUT DETECT	INFORMATION OSD		FIRST	DETECT
	OSD POSITION		VIDEO DETECT		switch to the new video source. When current video input
	INPUT DETECT		NONE
	MONITOR INFORMATION
			:SEL	EXIT :RETURN MENU :EXIT MENU	signal is not present, the monitor searches for a video
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
					signal from the other video input port. If the video signal
					is present in the other port, then the monitor switches the
					video source input port to the new found video source
					automatically.
					This function is available at input RGB 1/2/3.
					VIDEO DETECT: DVD/HD or VIDEO inputs will have
					priority over RGB1/2/3. When DVD/HD or VIDEO input
					signal is present the monitor will change and keep to the
					DVD/HD or VIDEO input.
					NONE: The Monitor will not search the other video input
					port.
	CONFIGURATION 2
	LONG CABLE MANUAL	MONITOR INFORMATION
MONITOR	OSD TURN OFF		MDT321S
	OFF TIMER
	INFORMATION OSD		MODEL NAME:		Indicates the model and serial number of your monitor.
INFORMATION	OSD POSITION		SERIAL:
	INPUT DETECT		12315XXX
	MONITOR INFORMATION
			EXIT :RETURN MENU :EXIT MENU
	:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU

English-24

1-26