Mitsubishi Electronics Diamond Pro 750SB, Diamond Plus 93SB Size and Position Controls

Controls

OSM (On-Screen Manager) control buttons on the front of the monitor function as follows:

	Main Menu
EXIT	Exits the OSM menu.
CONTROL	Moves the highlighted
/	area left/right to select
	one of the sub-menus.
CONTROL	Has no function.
–/+
SELECT/	Without OSD, switches
SBMODE	SuperBright Mode ON/OFF
	With OSD, enters sub menu
RESET	Resets all the controls within
	the highlighted menu
	to the factory setting.

Sub-Menu

Exits to the OSM controls main menu.

Moves the highlighted area left/right to select one of the controls.

Moves the bar in the – or + direction to decrease or increase the adjustment.

Has no function.

Resets the highlighted control to the factory setting.

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the reset function.

NOTE: When the OSM is off, it will act as the SuperBright (SB) function key. User can select between SB MODE OFF, SB MODE1, and SB MODE2. The first time this key is pressed, the current SB Mode is indicated. Within a 3 second window, if this key is selected again, the SB MODE will change to the next SB MODE. For example, the current mode is SB MODE OFF, the key is pressed twice within a 3 second time frame, the SB MODE will change to SB MODE1 and so on. The color temperature at each SB Mode is adjusted by appropriate color control except for the sRGB mode whose color setting cannot be adjusted. When the unit is turned off, it will reset to SB off mode.

Brightness/Contrast Controls

Brightness: Adjusts the overall image and background screen brightness.

Contrast: Adjusts the image brightness in relation to the background.

Degauss: Eliminates the buildup of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colours, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetized.

Caution: Please allow a minimum of 20 minutes to elapse between uses of the Degauss Control.

Size and Position Controls

Left/Right: Moves the image horizontally (left or right).

Down/Up: Moves the image vertically (up or down).

Narrow/Wide: Decreases or increases the horizontal size of the image.

Short/Tall: Decreases or increases the vertical size of the image.

Diamond Pro 750SB / Diamond Plus 93SB 7