Mitsubishi Electronics 1995SL user manual Specifications

Page 19

Specifications

Model	Diamond View 1995SL
Display Characteristics
Display Type	19” (48 cm) diagonal short-length
	cathode ray tube
Maximum Viewable Size	18” (45.7cm) diagonal
Dot pitch	0.26 mm
Surface coating	Anti-Glare, Anti-Reflective, Anti-
	Static coating
Graphics Signals
Maximum Resolution	1600 x 1200 pixels (at 75 Hz)
Recommended Resolution	1280 x 1024 pixels (at 85 Hz)
Horizontal Frequency	30 – 95 kHz
Vertical Frequency	50 - 160 Hz
Video Bandwidth	176 MHz
Microprocessor Controlled Graphics	9 factory preset timings
	15 user modes
Signal Connection	15-pin mini D-sub cable
Video Input	VGA-type (15 pin mini D-sub
	connector)
Video Signal	RGB analog (Positive polarity)
	0.7 Vpp/75 Ohm
Synchronisation	TTL separate, composite TTL
Plug & PLay	DDC-1, DDC-2B

15

Image 19

Contents User’s Manual UG/MO1995SL/0102/2 Troubleshooting Specifications Service Contacts Adjusting the MonitorMonitor Information Copyright Notice DisclaimerDealer Information Important Safety Instructions Features Monitor with attached signal cable Power cord User’s manual InstallationUnpacking the Monitor Drivers for Windows 95, 98, 2000 and Millennium Edition Exit Adjusting the MonitorEnter Brightness Hotkey Selecting Functions and Making AdjustmentsMain Menu Contrast HotkeyMake adjustments Hor. Size ContrastBrightness Hor. PositionTop corner UnbalanceTrapezoid ParallelogramOSD Language Recall/Reset and Image StatusResolution Maximum Vertical Refresh Rate Hz Timing and Refresh Rate SettingFrequency Hz Frequency KHz Factory Preset TimingsMode Resolution HorizontalNo image is displayed TroubleshootingPicture is scrolling or unstable Image is blurred or there is visible ghosting Colours are impureSpecifications Dimensions W x H x D Power ManagementMaximum Power Consumption Consumption in Power Saving ModeQueensland Service ContactsAustralian Service Contacts New South Wales and Australian Capital TerritoryVictoria and Tasmania New Zealand Service ContactsWestern Australia