Adjustment of the image from the computer
This projector adjusts the format of the video signal supplied from the computer. However, sometimes im- ages are not projected correctly owing to the type of the computer used. When the image from the computer isn't projected correctly, press the AUTO POSITION button. (See page 14.) If the image isn't projected cor- rectly yet, adjust the image from the computer using the menu.
Simple adjustment method
1. | Select HORIZ. POSITION in the SIGNAL menu. |
2. | Press the or button to adjust the horizontal start |
| position (or the left side of the image). |
3. | Select TRACKING in the SIGNAL menu. |
4. | Press the or button to adjust the horizontal end |
| position (or the right edge of the image). |
5. | Repeat steps 1 to 4 for optimum adjustment results. |
ENGLISH
opt.
SIGNAL
XGA60
6. Select VERT. POSITION in the SIGNAL menu. |
|
|
| HORIZ. POSITION |
| 0 |
|
|
|
|
|
|
|
|
| |
|
|
| VERT. POSITION |
| 0 |
|
|
|
|
|
|
|
|
| |
|
|
| FINE SYNC. |
| 0 |
|
|
|
|
|
|
|
|
|
|
|
|
| TRACKING |
| 0 |
|
|
|
|
|
|
|
|
|
|
|
|
| COMPUTER | RGB | |||
| RRGGBB INPUT |
| |||||
|
|
|
|
|
| ||
|
|
| SET UP |
| 7.5% |
| |
|
|
|
|
|
|
|
|
|
|
| HOLD |
| ON |
|
|
|
|
|
|
|
|
|
|
|
|
| USER |
| OK |
|
|
To move the image horizontally :
Adjust HORIZ. POSITION in the SIGNAL menu. Press the button to move the image to the left. Press the button to move the image to the right.
To move the image vertically :
Adjust VERT. POSITION in the SIGNAL menu. Press the button to move the image upward. Press the button to move the image downward.
When the image flickers or the image is out of focus :
Adjust FINE SYNC. in the SIGNAL menu.
When the top part of the image flags :
Change the setting of HOLD in the SIGNAL menu. Se- lect ON 
, press the ENTER button, and adjust BEGIN or END to minimize the flagging.
USER
|
| CLAMP | 0 |
|
| POSITION |
|
|
|
|
|
|
| CLAMP WIDTH | 1 |
|
|
|
|
When wide strips appear :
Adjust CLAMP POSITION or CLAMP WIDTH in the SIG- NAL - USER menu.
Important:
Do not change any of the settings in the
7. Press the or button to adjust the vertical start |
position (or the upper edge of the image). |
EN - 19