Mitsubishi Electronics DATA PROJECTOR To Output the External Output Signal of a Notebook Computer

Page 18

Connecting Personal Computers and Video Equipment

To Output the External Output Signal of a Notebook Computer

When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure.

1

2

Check whether a signal is being sent from the notebook computer to the projector.

An indication appearing on the liquid crystal display of the notebook computer does not necessarily mean that an external output signal is being output.

REFERENCE: When “Resolution” or “Frequency” is not displayed under “Info.” on the menu of the projector, this means that the external output signal is not being output from the personal computer. See “Resolution/Frequency” on Page E-57.

Should a sign not be output from the notebook computer, please try the operation described below.

For an IBM PC/AT compatible computer, press the [Fn] key plus any one of the [F1] to [F10] keys. (See the table below.)

Manufacturer

Model

Key

DELL

All computers

Fn + F8

EPSON

All computers

Fn + F8

FUJITSU

All computers

Fn + F10

iiyama

All computers

Fn + F3

IBM

All computers

Fn + F7

NEC

All computers

Fn + F3

Panasonic

All computers

Fn + F3

SHARP

All computers

Fn + F5

SONY

All computers

Fn + F7

SOTEC

All computers

Fn + F3

TOSHIBA

All computers

Fn + F5

Victor

All computers

Fn + F10

Note: Table information is current to December 2003.

Note:

*When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the projected image might not be correct even though the liquid crystal display shows a correct indication. Should this occur, stop the simultaneous display of the notebook computer and try the mode with external output only. Try an operation such as that described in aforementioned Step 2 and try closing the liquid crystal panel which might result in external output only.

*In some rare cases, the picture may not be displayed, depending on the connected device.

E-17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents XD70 Important Safety Information This label is located on the side of the remote control Do not look at the laser pointer’s light sourceImportant Safety Information Do not modify this equipment Place of installationNever remove the cabinet If you break or drop the cabinetMajor Features Table of Contents Table of Contents Checking the Supplied Accessories No UL Audio cable Mini plug, 2 m / 6.6 feetUSB cable type A, 2 m / 6.6 feet Security Sheet Security Label Checking the Supplied AccessoriesStorage case for projector and accessories Velcro belt Pocket Cable storage pouchNames of the Main Unit Parts Built-in Security Slot Names of the Main Unit PartsInserting the Batteries Remote Control Range Side View Top ViewConnect the video equipment and personal computer Procedure Up to Projecting to the ScreenPosition the projector Connect your equipment to the projectorPlacement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Video Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with Video Connectors Video cable Supplied item Video cable Suppled itemConnections with Component Signals Component cable Not suppliedConnections with the Audio Jack Audio cable Supplied item Audio conversion cable RedAudio cable Supplied item Switch on the projector power OperatingThis completes the selection of the display language Power Cable Connections and Switching the Power On/OffPress the Enter button to set CursorUnplug the power cable FinishingStandby button on main unit Adjust the projection image to the screen Adjustment of the Projection ScreenAdjustment of the Projection Screen Zoom ringMaking Adjustments with the Adjusters Adjuster buttonFocus ring General Operation Automatic AdjustmentWhen Auto Source is Off Input SelectionVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Press the Cancel button to immediately close the display Cancelling Video and Audio TemporarilyAdjustment of the Volume Freezing a Moving PictureEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Using the Laser Pointer OperationJOG buttons Connecting the computer and projectorClick button on back Click buttonControlling the Projector from a Computer Serial cable D-Sub 9-pin, straight commercially availableCanceling the password restoring the default Protecting the Projector with the Security LockCanceling the password Input the password using the number buttons 1 toCanceling the password/Changing the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsVolume Select buttons Menu Operation MethodMenu button Enter buttonMenu Screen Names and Functions Adjustment Bar and Settings ContentsAdjustment Bar Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup OptionInfo Brightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionPosition ResetFine Picture ImageQuick Color Adj Select the preset color modeColor GammaWhite Selection contents at the time of YPbPr inputColor Temp Color SpaceWhite Balance View AspectFilter Keystone Save Vertical Flip/Horizontal FlipKeystone ViewSetup Auto Power OffAuto Source Status Indicator Lamp ModeSetup Menu PositionInput Format Presentation TimerTo start the timer Video and S-VideoOn Screen OptionLanguage BackgroundStartup Screen Security LockOption Info Factory DefaultLamp Timer Reset StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Electrical SpecificationsOptical MechanicalSignal Resolution Frequency VideoTable of Supported Frequency Cabinet Dimensions Mitsubishi Electric Corporation

DATA PROJECTOR specifications

Mitsubishi Electronics has been a prominent player in the realm of projector technology, consistently providing high-quality data projectors designed to meet the demands of both professional and educational environments. Their data projectors are known for their exceptional brightness, clarity, and advanced features, making them a significant choice for presentations, meetings, and lectures.

One of the standout features of Mitsubishi data projectors is their high brightness capability. With luminous output reaching up to 5,000 ANSI lumens, these projectors ensure presentations remain clear and visible in various lighting conditions. This is especially crucial for large venues or rooms with significant ambient light. The powerful brightness is paired with high contrast ratios, delivering sharp and detailed images that bring content to life.

Mitsubishi projectors incorporate advanced LCD and DLP technologies, ensuring vibrant colors and excellent image quality. The use of 3LCD technology in some models provides a wider color gamut, resulting in more accurate color reproduction. This is beneficial for presentations that involve graphics and media, where color fidelity is essential to convey the right message.

Portability is another key characteristic of Mitsubishi data projectors. Many models are designed to be lightweight and compact, allowing for easy transportation between different venues. Features such as quick startup and shutdown times enhance usability, making it convenient for users who require quick setup and takedown during events.

In terms of connectivity, Mitsubishi projectors offer versatile options, including HDMI, VGA, and USB ports. This diverse range of inputs ensures compatibility with various devices such as laptops, tablets, and smartphones. Some models even support wireless connectivity, allowing for seamless presentations without the hassle of cables.

Mitsubishi Electronics also emphasizes user-friendly interfaces in their data projectors. Often equipped with intuitive control panels and remote controls, these projectors allow users to easily adjust settings and switch between input sources. Additionally, features like automatic keystone correction help maintain image quality by ensuring the projected output remains straight and properly aligned.

Durability and energy efficiency are further notable attributes of Mitsubishi data projectors. Many models are designed with long-lasting lamp life, reducing the need for frequent replacements, which not only saves costs but also contributes to a lower environmental impact.

In conclusion, Mitsubishi Electronics’ data projectors blend advanced technology with user-friendly features to cater to varying presentation needs. Their projectors are engineered for brightness, excellent image quality, and convenience, making them an ideal choice for anyone looking for reliable projection solutions in professional and educational settings.
Top Page Image Contents