Mitsubishi Electronics DATA PROJECTOR Mount the new lamp cartridge, Mount the lamp cover

Page 64

Replacing the Lamp Cartridge

5 Mount the new lamp cartridge.

(1)Push the lamp cartridge in slowly.

(Line it up with the screw holes in the projector.)

(2)Turn the lamp cartridge screw clockwise to tighten them.

6 Mount the lamp cover.

(1)Set the tip of the lamp cover in place, then close the lamp cover.

(2) Turn the lamp cover’s screw clockwise to tighten it.

7 Reset the Lamp Timer.

Connect the power cable, switch on the power, and then reset.

Select [Info.] [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-56.

Note:

After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.

Contact a store that sells the XD70U for a replacement lamp. Indicate you need a VLT-XD70LP replacement lamp for the XD70U (order code 41T-577).

E-63

Image 64
Contents XD70 Important Safety Information This label is located on the side of the remote control Do not look at the laser pointer’s light sourceImportant Safety Information Place of installation Never remove the cabinetDo not modify this equipment If you break or drop the cabinetMajor Features Table of Contents Table of Contents No UL Audio cable Mini plug, 2 m / 6.6 feet Checking the Supplied AccessoriesUSB cable type A, 2 m / 6.6 feet Checking the Supplied Accessories Storage case for projector and accessoriesSecurity Sheet Security Label Velcro belt Pocket Cable storage pouchNames of the Main Unit Parts Built-in Security Slot Names of the Main Unit PartsInserting the Batteries Remote Control Range Side View Top ViewProcedure Up to Projecting to the Screen Position the projectorConnect the video equipment and personal computer Connect your equipment to the projectorPlacement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Supplied item Video cable Suppled itemConnections with Component Signals Component cable Not suppliedAudio cable Supplied item Audio conversion cable Red Connections with the Audio JackAudio cable Supplied item Switch on the projector power OperatingPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorFinishing Unplug the power cableStandby button on main unit Adjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringAdjuster button Making Adjustments with the AdjustersFocus ring Automatic Adjustment When Auto Source is OffGeneral Operation Input SelectionSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Cancelling Video and Audio Temporarily Adjustment of the VolumePress the Cancel button to immediately close the display Freezing a Moving PictureImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Using the Laser Pointer OperationConnecting the computer and projector Click button on backJOG buttons Click buttonControlling the Projector from a Computer Serial cable D-Sub 9-pin, straight commercially availableCanceling the password restoring the default Protecting the Projector with the Security LockInput the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordContent of Adjustments and Settings Using the Quick MenuVolume Menu Operation Method Menu buttonSelect buttons Enter buttonAdjustment Bar and Settings Contents Adjustment BarMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewOption Menu name Item Name Sub Menu SetupInfo Picture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Aspect ViewFilter Vertical Flip/Horizontal Flip KeystoneKeystone Save ViewAuto Power Off SetupAuto Source Lamp Mode SetupStatus Indicator Menu PositionPresentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundSecurity Lock Startup ScreenOption Factory Default Lamp Timer ResetInfo StatusLamp Timer Resolution / FrequencyInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Specifications OpticalElectrical MechanicalResolution Frequency Video SignalTable of Supported Frequency Cabinet Dimensions Mitsubishi Electric Corporation

DATA PROJECTOR specifications

Mitsubishi Electronics has been a prominent player in the realm of projector technology, consistently providing high-quality data projectors designed to meet the demands of both professional and educational environments. Their data projectors are known for their exceptional brightness, clarity, and advanced features, making them a significant choice for presentations, meetings, and lectures.

One of the standout features of Mitsubishi data projectors is their high brightness capability. With luminous output reaching up to 5,000 ANSI lumens, these projectors ensure presentations remain clear and visible in various lighting conditions. This is especially crucial for large venues or rooms with significant ambient light. The powerful brightness is paired with high contrast ratios, delivering sharp and detailed images that bring content to life.

Mitsubishi projectors incorporate advanced LCD and DLP technologies, ensuring vibrant colors and excellent image quality. The use of 3LCD technology in some models provides a wider color gamut, resulting in more accurate color reproduction. This is beneficial for presentations that involve graphics and media, where color fidelity is essential to convey the right message.

Portability is another key characteristic of Mitsubishi data projectors. Many models are designed to be lightweight and compact, allowing for easy transportation between different venues. Features such as quick startup and shutdown times enhance usability, making it convenient for users who require quick setup and takedown during events.

In terms of connectivity, Mitsubishi projectors offer versatile options, including HDMI, VGA, and USB ports. This diverse range of inputs ensures compatibility with various devices such as laptops, tablets, and smartphones. Some models even support wireless connectivity, allowing for seamless presentations without the hassle of cables.

Mitsubishi Electronics also emphasizes user-friendly interfaces in their data projectors. Often equipped with intuitive control panels and remote controls, these projectors allow users to easily adjust settings and switch between input sources. Additionally, features like automatic keystone correction help maintain image quality by ensuring the projected output remains straight and properly aligned.

Durability and energy efficiency are further notable attributes of Mitsubishi data projectors. Many models are designed with long-lasting lamp life, reducing the need for frequent replacements, which not only saves costs but also contributes to a lower environmental impact.

In conclusion, Mitsubishi Electronics’ data projectors blend advanced technology with user-friendly features to cater to varying presentation needs. Their projectors are engineered for brightness, excellent image quality, and convenience, making them an ideal choice for anyone looking for reliable projection solutions in professional and educational settings.