Factory Reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure.
1.Press and hold down the Menu/Display button for 2 seconds,
2.Press the Tuning up or down buttons until “FACTORY” appears on the display, press the Select button, the display shows “RESET” and then press Select button again.
3.A full reset will be performed, the station list and presets will be erased. The display will show “RESETING” followed by “ROBERTS” after few
seconds a station scan search will be performed automatically. The display will show progress of the station search e.g. “>>>> 18”. The number on the right of the display is the number of stations that have been found.
1
2
2
3
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 26 |
|
