PLUS Vision U7-137, U7-132h user manual Finishing, Unplug the power cable

Page 24

Power Cable Connections and Switching the Power On/Off

Finishing

1 Switch off the power of the connected equipment

2 Switch off the power of the projector

Press the STANDBY button.

STATUS STANDBY

(button on main unit)

STANDBY LASER

RGB VIDEO AUTO

MENUQUICK

Q

The [Power Off] display appears.

When the level gauge reaches maximum, the projection screen will go off (in about 5 seconds) and the projector will enter the power-off operation.

Note

*The operation can be cancelled by pressing a button other than the STANDBY button.

*One more press of the STANDBY button will switch off the power.

The STANDBY indicator changes to blinking amber and lights a steady amber after about 90 seconds (when the unit enters the standby mode).

Power Off

OK ?

			Blinking amber		Lit amber
	Lit green		(Approximately 90 seconds)		Standby mode
STATUS	STANDBY	STATUS	STANDBY	STATUS	STANDBY

3 Unplug the power cable

Check that the STANDBY indicator is lit in amber and then unplug the power cable.

The STANDBY indicator will go off when the power cable is unplugged.

Warrning

Do not unplug the power cable while the STANDBY indicator is blinking amber. Doing so may shorten the life of the lamp or damage the projector.

E-24

Image 24

Contents U7-137 U7-132/U7-132h Precautions DOC Compliance NoticeInstallation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Adjustments and Settings Table of ContentsMenu Operations MiscellaneousChecking the Supplied Accessories RGB signal cable Mini D-sub 15-pin, 2 m / 6.6 feetDVI/Mini D-Sub 15-pin conversion adapter 18 cm / 0.59 feet Video cable RCA pin plug, 2 m / 6.6 feetChecking the Supplied Accessories Storage case for projector and accessoriesUSB cable type A, 2 m / 6.6 feet Cable pocketNames of the Main Unit Parts Built-in Security SlotNames of the Main Unit Parts Names of the Remote Control Parts Precautions Handling of the Remote ControlPreparing the Remote Control Remote Control RangeInserting the Batteries Procedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal Computers with a DVI Connector Connections with Personal ComputerDVI-D cable Available as an option. Order code Personal Computers with a Mini D-Sub 15-Pin Connector Connecting Personal Computers and Video EquipmentRGB signal cable Supplied item To Output the External Output Signal of a Notebook Computer Manufacturer Model KeyConnections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Suppled item Video cable Supplied itemConnections with Component Signals Connections with Audio Connectors Audio cable Supplied itemAudio conversion adapter Supplied itemConnections with the RGB OUT Connector Switch on the projector power OperatingButton on main unit Power Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable FinishingAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringMaking Adjustments with the Adjusters Focus ringRaising the projection image Lowering the projection imageAutomatic Adjustment of Analog RGB General OperationInput Selection Cancelling Video and Audio Temporarily Adjustment of the VolumePress the Cancel button to immediately close the display Freezing a Moving PictureEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Using the Laser Pointer OperationConnecting the computer and projector Click button on backJOG buttons Click buttonConnecting via a LAN U7-137 only Controlling the Projector from a ComputerRS-232C connections CN-2 D-Sub 9-pin sideProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsPress the Select or button to adjust VolumeMenu Operation Method Names and Functions of Buttons Used for Menu OperationsMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation RGB Menu name Item Name Sub Menu Setup TerminalPicture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Personal Computer Signal Video SignalsView AspectVertical Flip / Horizontal Flip KeystoneKeystone Save ViewSetup Auto Power OffAuto Source Menu PositionLamp Mode SetupStatus Indicator Input FormatPresentation Timer To start the timerOption LanguageOn Screen BackgroundNetwork Password Startup ScreenSecurity Lock OptionFactory Default Lamp Timer ResetInfo StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Blinking Indicator status What you should doThermal Protector Troubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Unplug the power cord Remove the lamp cover Replacing the Lamp CartridgeRemove the lamp cartridge Reset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Specifications OpticalElectrical MechanicalSignal Resolution Frequency VideoTable of Supported Frequencies Digital AnalogCabinet Dimensions 2005