Olympus P-330 manual If the cartridge compartment lid does not close

Caution

Never put your hand into the cartridge compartment.The thermal head reaches high temperatures, especially after repeated printing.

Notes

• When installing the ink

ribbon cartridge, stand

it as illustrated so that

dust will not get on the

If the cartridge compartment lid does not close

Remove the ink ribbon cartridge, and then reinsert it.

To remove the used ink ribbon cartridge

Open the cartridge compartment lid and push up the eject lever.

To load the half-used ink ribbon cartridge

ink ribbon.

Wind the ribbon until the black line comes to the left edge.

While pressing the center of the reel, wind the ink ribbon in the direction of the arrow.

•Do not touch the ink ribbon or place the ink ribbon cartridge in a dusty location. Fingerprints or dust on the ink ribbon may result in imperfect printing.

If ink ribbon should tear

Repair the ribbon with transparent tape. There should be no problem with using the remaining portion of the ribbon. Before loading the ink ribbon cartridge into the printer, turn the reel until the transparent tape hides.

Repair with transparent tape.

GettingStarted 15