Olympus P-330 manual If you click the Cancel button, the adjusting is

Page 37

Note

If the application software has the same adjustment

item as the driver software, do the

adjustment on the application software, not on the driver software. If

you adjust the same item

on both the application software and the driver

software, the image may

be printed with

unexpected result.

3 Adjust the Color Balance, Sharpness and Density.

Color Balance	Changes the color balance by adjusting
	the balance of red, green and blue.
	Move the R/G/B sliders to adjust the
	level of each color ranging from 120 %
	(stronger) to 80% (weaker) by 1 %. You
	can adjust the color balance also on the
	[Preview] screen (page 39).
Sharpness	Adjusts the degree of emphasis of
	edges in the printout. Move the slider
	to adjust the sharpness by 6 steps
	ranging from +5 (Hard) to 0 (Soft).
Density	Move the slider to adjust the density by
	15 steps ranging from +7 (Dark) to -7
	(Bright).
Default	Resets the above items to the default
	setting. Color balance becomes 100 %,
	sharpness and density become 0.

If you click the [Cancel] button, the adjusting is

canceled and the previous setting is restored.

4 Click [OK].

The [Print] dialog appears.

For Macintosh

37

Image 37

Contents 330 Trademarks Contents System requirements See the operating instructions of the Digital Color Installing the softwareInsert the supplied CD-ROM into the CD-ROM Uninstalling the software Printing For Windows 95/98 When the data is in the print spooler of Windows 95/98 When a printing message is on the screenMake the environment in full-color Hints for better printoutMaximum picture size Setting the resolutionAdjusting the picture quality Making the split print Making multiple prints at high speed For Windows 95/98 Your computer and system software must meet Click Add For Windows 3.1 Printing Direct to Port, and click OK Uninstalling the software Set Size referring to the combination below You can make split prints page 27, set resolution Stopping printing When the data is in the Print Manager1376 x 1024 pixels at 306 dpi 688 x 512 pixels at 153 dpi Adjusting the picture quality Making the split print Making multiple prints at high speed CD-ROM drive needed for installation Connect the printer to the computer Click Install Select on or OFF for the Background Print To print a tall image To preview the printed image, see Adjust the image size and resolution When using the Print MonitorIf printing has already started To print charactersAdjusting the picture quality If you click the Cancel button, the adjusting is You can select 1, 2, 4, 9, or 16 images per sheet Previewing the image Previewing If you decide not to print the page afterPrinter prints the image split into pieces TroubleshootingEdges of the printed image are jagged Edges of the printed characters are jaggedCannot install from the CD-ROM Page 300U Owners Record InformationTable of contents Restrictions on duplication Safety precautionsIf the power cord is damaged, unplug it If the printer cabinet is damaged, unplug the power cordDo not damage the power cord Connect the power cord correctly Do not install the printer in the following placesDo not disassemble or modify the printer Do not place liquids on the printerDo not overload the power outlet Do not hold the power cord plug with wet hands Do not move the printer while the power cord is tautDo not block the vent Do not pull the cord with a jerkBeware of moisture condensation Getting Started Unpacking the printerPrinting of the image from a PC or Macintosh What you can do with the DigitalPrinting 30 sheets continuously Identifying the parts Automatic feeder Loading the ink ribbon cartridge If the cartridge compartment lid does not close Automatic feeder Inserting the print paperTo avoid paper jamming, fan the print paper Printer Installing the automatic feeder toDigital Cameras Printing an image recorded by Olympus Digital CamerasPrinting an image recorded by Olympus Digital Cameras Tips Cameras LCD ON/OFF button Frame backward Set the dial of the automatic feeder to Digital Vision D-600L/D-500L Digital Connecting to an IBM PC/AT and its compatible Power to the computer and to the printer before connectingFeed the data from the computer Connecting to a Macintosh and its compatiblePrinting while directly inserting print paper For Your Information If the indicators are on For Your Information Remove the jammed paper from the automatic If the print paper is jammedSupplied accessories SpecificationsAutomatic feeder Optional supplies print packs Precautions on the ink ribbon cartridge and print paperStandard set P-60NE Standard papers Sticker 16-cut set N-60NS16E Adhesive-label sheets Sticker 1-cut set P-60NS1E Adhesive-label sheetsOlympus America INC

Related manuals

Manual 79 pages 860 b