Onkyo SKC-340C Connecting Your Speakers, Speaker Connection Precautions Connecting Speaker

Page 20

HT-S590_En.book Page 20 Wednesday, February 1, 2006 4:26 PM

Connecting Your Speakers

Speaker Connection Precautions

 

Connecting Speaker

 

 

 

Read the following before connecting your speakers:

You can connect speakers with an impedance of

6 ohms or higher. If you use speakers with a lower impedance, and use the amplifier at high volume lev- els for a long period of time, the built-in protection circuit may be activated.

Disconnect the power cord from the wall outlet before making any connections.

Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals to only positive

(+) terminals, and negative (–) terminals to only nega- tive (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.

Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided.

Be careful not to short the positive and negative wires.

Doing so may damage the AV receiver.

Don’t connect more than one cable to each speaker termi- nal. Doing so may damage the AV receiver.

Don’t connect one speaker to several terminals.

The AV receiver’s positive (+) speaker terminals are color-coded for ease of identification. (The negative (–) speaker terminals are all black.)

Speaker terminal

Color

Front left

White

 

 

Front right

Red

 

 

Center

Green

 

 

Surround left

Blue

 

 

Surround right

Gray

 

 

Subwoofer

Purple

 

 

1

Strip 3/8" (10 mm) of insu-

3/8" (10 mm)

 

 

lation from the ends of the

 

 

speaker cables. (Supplied

 

 

speaker cables are already

 

 

stripped.)

 

2 While pressing the lever, insert

 

 

the wire into the hole, and then

 

 

release the lever.

 

 

Make sure that the terminals are

 

 

gripping the bare wires, not the

 

 

insulation.

 

The following illustration shows which speaker should be connected to each pair of terminals.

Purple

GrayBlue

Subwoofer

Surround

Surround

 

right

left

 

speaker

speaker

20

White

GreenRed

Center speaker

Front right

Front left

 

speaker

speaker

Image 20
Contents HT-S590 Important Safety Instructions AvisPrecautions PowerSpeaker Precautions PrecautionsPlacement Using Close to a TV or ComputerFeaturesContents Package Contents Before Using the AV receiver Setting the Voltage Selector on some modelsInstalling the Batteries Using the Remote ControllerFront & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel Voltage Selector only some modelsSpeaker Package RearSpeaker terminals Keyhole slotsReceiver Mode Remote ControllerHow to Use the Remote Controller Remote Controller DVD Mode CD Mode To select your CD player as the input source, pressMD, & CDR Mode CDRHDD Mode To select your HDD component as the input source, pressAlbum +/- button Playlist / buttonsTape Mode Play buttonStop button Reverse Play buttonEnjoying Home Theater Speaker Sets a and BSpeaker Set a Main Room Speaker Set B Sub RoomConnecting Your Speakers Speaker Connection Precautions Connecting SpeakerConnecting Your Speakers Wall Mounting Using Speaker Mounts/BracketsUsing Rubber Stoppers with the Speakers Front speaker SKF-340F Surround speaker SKM-340SConnecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Other ModelsConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsConnecting a DVD Player Video Connection DVD Player to AV Receiver to TVAudio Connection Multichannel Audio ConnectionVideo Connection VCR to AV Receiver to TV Connecting a VCRConnecting a VCR for Playback Video Connection Connecting a Camcorder, Games Console, or Other DeviceConnecting a VCR for Recording RF OUT Connecting a CD Player or Turntable CD Player or Turntable with Built-in Phono PreampConnecting an HDD-compatible Component Audio Only Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting Onkyo Components Connecting the Power CordAuto Power On/Standby Remote ControlTesting the speakers Turning OnTurning On the AV Receiver Smooth Operation in a Few Easy StepsChanging the Input Display First Time SetupAssigning Digital Inputs to Input Sources Select a suitable listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentDisplaying Source Information Using the Multichannel InputPlaying Your AV Components Using the Tuner Tuning into Radio StationsAM Frequency Step Setup Not North America and Europe Listening to the RadioUsing the Tuner Presetting Radio StationsDeleting Presets Selecting Preset StationsProgram Types Used in Europe PTY Using RDS European models onlyWhat is RDS? Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using Headphones Setting the Display BrightnessAdjusting the Bass & Treble Common FunctionsUsing the Sleep Timer Using the OptiResponse EqualizerCommon Functions Muting the AV ReceiverAdjusting Speaker Levels HeadphonesSpeaker Set B Multichannel DVD InputRecording from Different AV Sources RecordingRecording the Input Source Selecting Listening Modes Using the Listening ModesSurround button remote controller only Using the Listening Modes About the Listening ModesOnkyo Original DSP Modes DTSInput Channel Settings Adjusting the Listening ModesUsing the Audio Adjust Functions Adjusting the Listening Modes Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER Plii Music Mode SettingsSpeaker Distance Advanced SetupAdvanced Speaker Settings Advanced Setup Speaker LevelsWhile the Subwoofer setting is Speaker ConfigurationSelected, use the Left and Right Buttons to select Yes orCrossover Frequency Double BassUse the Down button to Use the Left and Right / buttons to selectDigital Input Signal Formats Correcting Sound and Picture SyncTroubleshooting Troubleshooting Sound changes when I connect my head- phones? Can’t record?How do I change the language of a multiplex source? Functions don’t work?Specifications Amplifier SectionGeneral Video SectionSpecifications 1ch Home Theater Speaker PackageOnkyo U.S.A. Corporation Onkyo China Limited

SKW-340, SKM-340S, SKF-340F, SKC-340C specifications

The Onkyo SKC-340C, SKM-340S, SKW-340, and SKF-340F are a cohesive speaker system designed for home theater enthusiasts and audiophiles looking for a complete surround sound experience. Each component of this set is engineered to deliver impressive audio performance, making it well-regarded in the realm of consumer electronics.

Starting with the SKC-340C, which serves as the center channel speaker, its primary role is to anchor dialogue and provide clarity in movies and music. Featuring a dual 5.25-inch woofers and a 1-inch tweeter, it is designed to enhance vocal frequencies, delivering clear dialogue and nuanced sound effects. The speaker is tuned to blend seamlessly with the other components in the system, ensuring that sound flows naturally across all channels.

Next is the SKM-340S, the surround speaker in the system. Compact yet powerful, it employs a 5.25-inch woofer combined with a pivoting 1-inch tweeter. This design allows for a broader soundstage while maintaining precise directionality of sound, an important aspect for immersive surround sound scenarios. The SKM-340S is designed to accommodate various mounting options, whether on walls or shelves, enhancing flexibility in home setup.

The SKW-340 subwoofer rounds out the system by providing deep, powerful bass response essential for a fulfilling home theater experience. Equipped with a 10-inch driver in a front-firing configuration, the SKW-340 is engineered to deliver rich low-frequency sounds without distortion. It sports a built-in amplifier that handles peak power with ease, ensuring your audio experience remains consistent even during the most dynamic scenes.

Completing the lineup is the SKF-340F, a pair of floor-standing speakers that bring both style and performance into the equation. With dual 5.25-inch woofers and a 1-inch tweeter, they provide a full-range audio experience suitable for music and movie playback. The design of the SKF-340F incorporates acoustic enhancements such as a bass-reflex port that optimizes airflow, resulting in enhanced bass response that does not overpower mid and high frequencies.

Overall, the Onkyo SKC-340C, SKM-340S, SKW-340, and SKF-340F combine to create a comprehensive audio experience that captures the essence of sound both in passive listening and active viewing. Their engineering prioritizes precision and clarity, ensuring that whether you're gaming, binge-watching, or enjoying music, your auditory experience is both robust and enjoyable. Together, they stand as a testament to Onkyo's commitment to quality audio design, making this system a worthwhile investment for those serious about their sound.