Onkyo SKW-340, SKC-340C, SKF-340F, SKM-340S instruction manual Advanced Setup, Speaker Levels

Page 51

HT-S590_En.book Page 51 Wednesday, February 1, 2006 4:26 PM

Advanced Setup—Continued

Speaker Levels

With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position.

The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver is muted.

1

 

Press the [RECEIVER] button fol-

RECEIVER

lowed by the [SETUP] button on

 

 

 

 

the remote controller.

 

SETUP

 

2

 

Use the Up and Down [ ]/[ ]

buttons to select “3. Level Cal,” and then press the [ENTER] but- ton.

A pink noise test tone is output by the front left speaker.

ENTER

3

Turn up the volume so that you

 

 

can hear the test tone suffi-

 

ciently.

 

While each speaker outputs the test

 

tone, its name appears on the display, as

 

shown.

 

 

 

 

 

 

 

 

 

 

 

 

4

Use the Left and Right [

]/[ ]

 

buttons to adjust the speaker

 

level, and use the Down [

] but-

 

ton to select the next speaker.

The level can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

5

Repeat step 4 so that the level of

 

 

the test tone from each speaker

 

is the same.

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 52) do

 

not output the test tone.

 

 

6

Press the [SETUP] button.

 

 

Setup closes.

 

Don’t forget to turn down the volume if

SETUP

you turned it up while setting the levels.

 

When you want to go back up one

 

menu level to “Level Cal,” press the

 

[RETURN] button.

 

 

Note:

•A quicker way to adjust the speaker levels is to press the remote controller’s [TEST TONE] button to output the test tone, use the [LEVEL–] and [LEVEL+] but- tons to adjust the levels, and use the [CH SEL] button to select the speakers.

•If the multichannel input is selected (page 37), in step 2, the “3. MultiLevel” menu appears instead of the “3. Level Cal” menu, and you can adjust the level of each channel of the multichannel input regardless of the Speaker Configuration settings.

You can adjust the volume of each speaker from – 12 dB to +12 dB (–30 dB to +12 dB for the sub- woofer).

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents HT-S590 Avis Important Safety InstructionsPower PrecautionsUsing Close to a TV or Computer Speaker PrecautionsPrecautions PlacementFeaturesContents Package Contents Using the Remote Controller Before Using the AV receiverSetting the Voltage Selector on some models Installing the BatteriesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsVoltage Selector only some models Rear PanelKeyhole slots Speaker PackageRear Speaker terminalsRemote Controller How to Use the Remote ControllerReceiver Mode Remote Controller DVD Mode To select your CD player as the input source, press CD ModeCDR MD, & CDR ModePlaylist / buttons HDD ModeTo select your HDD component as the input source, press Album +/- buttonReverse Play button Tape ModePlay button Stop buttonSpeaker Set B Sub Room Enjoying Home TheaterSpeaker Sets a and B Speaker Set a Main RoomSpeaker Connection Precautions Connecting Speaker Connecting Your SpeakersFront speaker SKF-340F Surround speaker SKM-340S Connecting Your SpeakersWall Mounting Using Speaker Mounts/Brackets Using Rubber Stoppers with the SpeakersOther Models Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksVideo Connection Formats Connecting Your ComponentsConnecting Both Audio & Video Which Connections Should I Use?Video Connection DVD Player to AV Receiver to TV Connecting a DVD PlayerMultichannel Audio Connection Audio ConnectionConnecting a VCR Connecting a VCR for PlaybackVideo Connection VCR to AV Receiver to TV Connecting a Camcorder, Games Console, or Other Device Connecting a VCR for RecordingVideo Connection RF OUT CD Player or Turntable with Built-in Phono Preamp Connecting a CD Player or TurntableConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting an HDD-compatible Component Audio OnlyRemote Control Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbySmooth Operation in a Few Easy Steps Testing the speakersTurning On Turning On the AV ReceiverFirst Time Setup Assigning Digital Inputs to Input SourcesChanging the Input Display Start playback on the source component Select a suitable listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationUsing the Multichannel Input Playing Your AV ComponentsDisplaying Source Information Listening to the Radio Using the TunerTuning into Radio Stations AM Frequency Step Setup Not North America and EuropeSelecting Preset Stations Using the TunerPresetting Radio Stations Deleting PresetsUsing RDS European models only What is RDS?Program Types Used in Europe PTY Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Common Functions Using HeadphonesSetting the Display Brightness Adjusting the Bass & TrebleMuting the AV Receiver Using the Sleep TimerUsing the OptiResponse Equalizer Common FunctionsMultichannel DVD Input Adjusting Speaker LevelsHeadphones Speaker Set BRecording Recording the Input SourceRecording from Different AV Sources Using the Listening Modes Surround button remote controller onlySelecting Listening Modes DTS Using the Listening ModesAbout the Listening Modes Onkyo Original DSP ModesAdjusting the Listening Modes Using the Audio Adjust FunctionsInput Channel Settings Plii Music Mode Settings Adjusting the Listening ModesUsing the Late Night Function Dolby Digital only Using the CinemaFILTERAdvanced Setup Advanced Speaker SettingsSpeaker Distance Speaker Levels Advanced SetupButtons to select Yes or While the Subwoofer setting isSpeaker Configuration Selected, use the Left and RightUse the Left and Right / buttons to select Crossover FrequencyDouble Bass Use the Down button toCorrecting Sound and Picture Sync Digital Input Signal FormatsTroubleshooting Troubleshooting Functions don’t work? Sound changes when I connect my head- phones?Can’t record? How do I change the language of a multiplex source?Video Section SpecificationsAmplifier Section General1ch Home Theater Speaker Package SpecificationsOnkyo China Limited Onkyo U.S.A. Corporation

SKW-340, SKM-340S, SKF-340F, SKC-340C specifications

The Onkyo SKC-340C, SKM-340S, SKW-340, and SKF-340F are a cohesive speaker system designed for home theater enthusiasts and audiophiles looking for a complete surround sound experience. Each component of this set is engineered to deliver impressive audio performance, making it well-regarded in the realm of consumer electronics.

Starting with the SKC-340C, which serves as the center channel speaker, its primary role is to anchor dialogue and provide clarity in movies and music. Featuring a dual 5.25-inch woofers and a 1-inch tweeter, it is designed to enhance vocal frequencies, delivering clear dialogue and nuanced sound effects. The speaker is tuned to blend seamlessly with the other components in the system, ensuring that sound flows naturally across all channels.

Next is the SKM-340S, the surround speaker in the system. Compact yet powerful, it employs a 5.25-inch woofer combined with a pivoting 1-inch tweeter. This design allows for a broader soundstage while maintaining precise directionality of sound, an important aspect for immersive surround sound scenarios. The SKM-340S is designed to accommodate various mounting options, whether on walls or shelves, enhancing flexibility in home setup.

The SKW-340 subwoofer rounds out the system by providing deep, powerful bass response essential for a fulfilling home theater experience. Equipped with a 10-inch driver in a front-firing configuration, the SKW-340 is engineered to deliver rich low-frequency sounds without distortion. It sports a built-in amplifier that handles peak power with ease, ensuring your audio experience remains consistent even during the most dynamic scenes.

Completing the lineup is the SKF-340F, a pair of floor-standing speakers that bring both style and performance into the equation. With dual 5.25-inch woofers and a 1-inch tweeter, they provide a full-range audio experience suitable for music and movie playback. The design of the SKF-340F incorporates acoustic enhancements such as a bass-reflex port that optimizes airflow, resulting in enhanced bass response that does not overpower mid and high frequencies.

Overall, the Onkyo SKC-340C, SKM-340S, SKW-340, and SKF-340F combine to create a comprehensive audio experience that captures the essence of sound both in passive listening and active viewing. Their engineering prioritizes precision and clarity, ensuring that whether you're gaming, binge-watching, or enjoying music, your auditory experience is both robust and enjoyable. Together, they stand as a testament to Onkyo's commitment to quality audio design, making this system a worthwhile investment for those serious about their sound.
Top Page Image Contents