PLUS Vision U5-732 user manual Finishing, Unplug the power cable, Standby button on main unit

Page 25

Power Cable Connections and Switching the Power On/Off

Finishing

1 Switch off the power of the connected equip- ment

2 Switch off the power of the projector

Press the STANDBY button.

STANDBY (button on main unit)

The [Power Off] display appears.

When the level gauge reaches maximum, the projection screen will go off (in about 5 seconds) and the projector will enter the power-off operation.

Note

*The operation can be cancelled by pressing a button other than the STANDBY button.

*One more press of the STANDBY button will switch off the power.

The STANDBY indicator changes to flashing amber and lights a steady amber after about 90 seconds (when the unit enters the standby mode).

	STATUS	STATUS	STATUS
	STANDBY	STANDBY	STANDBY
		Flashing amber	Lit amber
	Lit green	(Approximately 90	Lit amber
	Lit green	(Approximately 90	Standby mode
		seconds)	Standby mode
		seconds)

3 Unplug the power cable

Check that the STANDBY indicator is lit in amber and then unplug the power cable.

The STANDBY indicator will go off when the power cable is un- plugged.

STANDBYLASER

RGB VIDEO AUTO

MENUQUICK

Q

Power Off

OK ?

Warrning

Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp or damage the projector.

E-25

Image 25

Contents U5-732 This label is located on the side of the remote control PrecautionsDOC Compliance Notice Do not look at the laser pointer’s light sourcePower Supply InstallationCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Power cable 1.8 m / 5.9 feet Checking the Supplied AccessoriesUSB cable type A, 2 m / 6.6 feet Storage case for projector and accessories Checking the Supplied AccessoriesVelcro strap Pocket Cable storage pouch Zoom ring E-26 Names of the Main Unit PartsNames of the Main Unit Parts Built-in Security SlotNames of the Remote Control Parts Names of Parts/Preparing the Remote Control UnitInserting the Batteries Remote control sensor 5m/16.4feet Remote Control RangeSide View 6m/19.7feetProcedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuidePlacement Guide Lens center Connections with Personal Computer Personal computer RGB signal cable Supplied itemConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Video Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors → Video See Input Format on Page E-56Component cable Available as an option Order code Connections with Component SignalsGreen Blue Red Cb Cr Pb Pr Green Blue RedAudio cable Supplied item Audio conversion adapter Red Connections with the Audio JackAudio cable Supplied item Operating Switch on the projector powerPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorFinishing Unplug the power cableStandby button on main unit Adjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringAdjuster button Making Adjustments with the AdjustersFocus ring Raising the projection imageWhen Auto Source is Off When Auto Source is OnGeneral Operation Input SelectionPress of the Auto button starts the automatic adjustment Automatic AdjustmentGeneral Operation Freezing a Moving Picture Cancelling Video and Audio TemporarilyAdjustment of the Volume Image can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Operation Using the Laser PointerClick button on back Connecting the computer and projectorJOG buttons Click buttonSerial cable D-Sub 9-pin, straight commercially available Controlling the Projector from a ComputerProtecting the Projector with the Security Lock Canceling the password/Changing the password Input the password using the number buttons 1 toCanceling the password Changing the passwordContent of Adjustments and Settings Using the Quick MenuVolume Menu button Menu Operation MethodSelect buttons Enter buttonAdjustment Bar Adjustment Bar and Settings ContentsMenu Screen Names and Functions Menu Operation MethodMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition al- lows selection of the item name Making Adjustments/SettingsSub menu Selecting Another Menu Name with Remote Control Operation View ColorVideo Menu name Item Name Sub Menu SetupOption InfoImage Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionPress of the Enter button forces the reset ResetFine Picture PositionColor Select the preset color modeQuick Color Adj GammaColor Temp Selection contents at the time of YPbPr inputWhite Color SpaceWhite Balance Video Signals Personal Computer SignalView AspectKeystone Vertical Flip / Horizontal FlipKeystone Save ViewAuto Power Off SetupAuto Source Setup Lamp ModeStatus Indicator Menu PositionTo start the timer Presentation TimerInput Format Video and S-VideoLanguage OptionOn Screen BackgroundSecurity Lock Startup ScreenOption Lamp Timer Reset Factory DefaultInfo StatusLamp Timer Resolution / FrequencyInfo Thermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Optical SpecificationsElectrical MechanicalResolution Frequency Video SignalTable of Supported Frequency On Apple Macintosh260 216 Unit mm inch Cabinet Dimensions2005