Microsoft TA61 manual Inserting Key Caps

Page 12

Inserting Key Caps

The labels are replaced as follows:

Remove the key cap from the keyboard (see removing the key cap) and pull the transparent key cap upwards.

The transparent key cover is then released and the label can be removed.

Replace the label and fit the transparent key cover (with the mat and concave side facing upwards) back into the key cap.

Inserting Key Caps

cam

rocker plate

quadruple key cap with scissors

Insert the key cap in the keyboard and press firmly into place.

When inserting double or triple keys, please ensure that the guide cylinder is on the left. The quadruple key caps are corresponding - with the guide cylinder arranged on the upper left.

Ensure while putting on the key caps that the white cam of the rocker plate are in the planned bulge of the keyboard.

If you hear a click, the key caps are inserted correctly.

GB - 7

Image 12
Contents TA61 POS Keyboard User Guide Edition April Page Contents Page General Authorization Manufacturer’s Declaration and ApprovalFCC-Class a Declaration Tested Safety Safety InstructionsUser Information User InformationCleaning Instructions Scope of supplyScope of supply Scope of supply Set of keys contains Following items can be ordered optionallyMounting keys Exchanging the KeysInserting Key Labels Mounting keysInserting Key Caps Inserting Key CapsTA61 keyboard GeneralKeypad KeypadKey switch Key switchUsing the swipecard reader Swipecard reader SCRCleaning Instructions Connection methodConnection method Releasing the Cable Connection Self-testReleasing the Cable Connection Technical data AppendixKeyboard layout Keyboard layout