Microsoft TA61 manual Key switch, Swipecard reader SCR, Using the swipecard reader

Key switch

Key switch

The TA61 keyboard is equipped with a key switch with 6 switch positions. Switch position 0 is the basic position; switch positions 1-4 are provided for customer-specific applications. In positions 0 and 1, the key can be re- moved.

0

T1

2

3

4

(5)

The sixth switch position, which is designated on the lock by T, is intended for use by Field Enginee- ring. From switch position 0, the key provided can be turned to position T only. This key is not included in the scope of supply.

The key switch has only one closure, i.e. there is only one set of keys for all keylocks that includes the above-mentioned key variants for the various switch positions.

Swipecard reader (SCR)

The TA 61 is equipped with a swipecard reader which enables all tracks of the swipecard reader to be read simultaneously when the card is swiped through once.

Using the swipecard reader

Pull the magnetic card evenly and quickly, from right to left, through the slot on the swipecard reader. Make sure that the magnetic stripe is facing the keys.

GB - 10