Onkyo Specifications and Features of TX-DS797 Receiver

Page 71

Specifications

AMPLIFIER SECTION

 

TUNER SECTION

 

Continuous Average Power output (FTC)

FM

 

All channels:

100 watts per channel min. RMS at

Tuning Range:

87.5 — 108.0 MHz (50 kHz steps)

 

8 ohms, 2 channels driven from 20

Usable Sensitivity

11.2 dBf, 1.0 V (75 ohms IHF)

 

Hz to 20 kHz with no more than

Mono:

 

0.08% total harmonic distortion.

 

0.9 V (75 ohms DIN)

 

130 watts min. RMS at 6 ohms, 2

Stereo:

17.2 dBf, 2.0 V (75 ohms IHF)

 

channels driven from 1 kHz with

 

23 V (75 ohms DIN)

 

no more than 0.1% total harmonic

50 dB Quieting Sensitivity

17.2 dBf, 2.0 V (75 ohms)

 

distortion.

Mono:

Continuous Power output (DIN)

135 watts at 6 ohms

Stereo:

37.2 dBf, 20 V (75 ohms)

Maximum Power output (EIAJ)

160 watts at 6 ohms

Capture Ratio:

2.0 dB

Dynamic Power Output (Stereo)

2 250 watts at 3 ohms

Image Rejection Ratio

 

 

2 210 watts at 4 ohms

USA & Canadian models:

40 dB

 

2 130 watts at 8 ohms

Other area models:

85 dB

Total Harmonic Distortion:

0.08% at rated power

IF Rejection Ratio:

90 dB

 

0.08% at 1 Watt output

Signal-to-Noise Ratio

 

IM Distortion:

0.08% at rated power

Mono:

76 dB

 

0.08% at 1 Watt output

Stereo:

70 dB

Damping Factor:

60 at 8 ohms

Alternate Channel Attenuation:

55 dB

Input Sensitivity and Impedance

 

Selectivity:

50 dB (DIN)

PHONO:

2.5 mV, 50 kohms

AM Suppression Ratio:

50 dB

LINE (CD, TAPE, DVD,

 

Total Harmonic Distortion

 

VIDEO 1-5):

200 mV, 50 kohms

Mono:

0.2%

MULTICHANNEL INPUT

 

Stereo:

0.3%

(FRONT L/C/R, SURROUND

 

Frequency Response:

30 Hz — 15 kHz, ±1.0 dB

L/R, SURROUND BACK L/R):

200 mV, 50 kohms

Stereo Separation:

45 dB at 1 kHz

(SUBWOOFER):

36 mV, 50 kohms

AM

30 dB at 100 Hz — 10 kHz

COAXIAL 1, 2, 3 (DIGITAL):

0.5 Vp-p, 75 ohms

 

DVD, VIDEO 1, 2, 3, 4, 5:

1 Vp-p, 75 ohms

Tuning Range

 

 

1 Vp-p, 75 ohms (Y)

USA & Canadian models:

530 to 1,710 kHz (10-kHz steps)

 

0.28 Vp-p, 75 ohms (C)

European & Australian models:

522 to 1,611 kHz (9-kHz steps)

COMPONENT VIDEO 1, 2:

1 Vp-p, 75 ohms (Y)

Worldwide models:

531 to 1,602 kHz (9-kHz steps)

 

0.7 Vp-p, 75 ohms (PB, PR)

 

530 to 1,710 kHz (10-kHz steps)

Output Level and Impedance

 

Usable Sensitivity:

30 V

Rec out (TAPE, VIDEO 1, 2):

 

Image Rejection Ratio:

40 dB

 

200 mV, 470 ohms

IF Rejection Ratio:

40 dB

Pre out:

1 V, 470 ohms

Signal-to-Noise Ratio:

40 dB

ZONE 2 OUT:

100mV, 470 ohms

Total Harmonic Distortion:

0.7%

VIDEO (VIDEO 1, 2, MONITOR

GENERAL

 

OUT, ZONE 2 OUT):

1 Vp-p, 75 ohms

 

Power Supply

 

 

1 Vp-p, 75 ohms (Y)

 

 

0.28 p-p, 75 ohms (C)

USA & Canadian models:

AC 120 V, 60 Hz

COMPONENT VIDEO OUT:

1 Vp-p, 75 ohms (Y)

European & Australian models:

AC 230-240 V, 50 Hz

 

0.7 Vp-p, 75 ohms (PB, PR)

Some Asian models:

AC 220-230 V, 50/60 Hz

Phono Overload:

120 mV RMS at 1 kHz, 0.5% T.H.D.

Worldwide models:

AC 220-230 and 120 V switchable,

Frequency Response:

10 Hz to 100 kHz : +1/–3 dB

Power Consumption

50/60 Hz

 

(CD in Direct mode)

 

RIAA Deviation:

20 Hz to 20 kHz : ±0.8 dB

USA & Canadian models:

6.8 A

Tone Control

 

Other models:

550 W

Bass:

±10 dB at 50 Hz

Dimensions (W H D):

435 175 459 mm

Treble:

±10 dB at 20,000 Hz

Weight

17-1/8" 6-7/8" 18-1/16"

Signal-to-Noise Ratio (Stereo)

 

 

Phono:

80 dB (IHF A, 5 mV input)

USA & Canadian models:

35.9 lbs.

CD/Tape:

110 dB (IHF A, 0.5 V input)

Other models:

17.3 kg

 

 

REMOTE CONTROLLER

 

 

 

Transmitter:

Infrared

 

 

Signal range:

Approx. 16 ft., 5 meters

 

 

Power supply:

Two “AA” batteries (1.5 V 2)

Specifications and features are subject to change without notice.

71

Image 71
Contents TX-DS797 Avis Important SafeguardsPrecautions Contents Contents Supplied accessories FeaturesInstalling the remote controller batteries Before using this unitSetting the Voltage selector Worldwide models only Using the remote controllerFront panel display Front panel facilitiesFront panel Front panel facilities Remote controller Remote controller Coaxial cable Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Improper connection Inserted completely3 4 Rear panel facilitiesMulti Channel Input Remote ControlIR IN/OUT Video IN/OUTConnections Connecting your audio componentsConnecting a turntable PH Connecting a compact disc player CDSignal flow Audio connection cable Left white Right red Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVDConnecting a video cassette recorder Video Video 5/VIDEO CAM Input Connecting a television monitor or projectorConnecting video camera, etc Speaker placement Connecting speakersIdeal speaker configuration Minimum speaker configuration for surround sound playbackConnecting a subwoofer Connecting speakersConnecting speakers Connecting the speaker cableRemote Zone Zone Connecting the remote zone Zone 2 speakersWhen using the Zone 2 OUT terminals Connect the TX-DS797 to the monitor for the remote zoneOther component From connecting blockRcvr Connecting the powerPower STANDBY/ON StdbyAssembling the AM loop antenna Connecting antennasConnecting the included antennas Connecting the AM antenna cableDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaAdvanced Menu Setup menusBasic Menu Press the Setup button Setup menusNavigating through the Setup menu Speaker Impedance sub-menu Hardware SetupHardware Setup menu IR in Setup sub-menuSpeaker Config sub-menu Speaker SetupSpeaker Setup menu Speaker Distance sub-menu Speaker SetupRight Level Calibration sub-menuCalibrating the speaker levels LeftPeak Level Bass Peak Level Bass Peak Level Manager* sub-menuBass Peak Level Limiter Initial settings for each input source Input SetupInput Setup menu Digital Setup sub-menuDigital Format Input SetupMultichannel Setup sub-menu Component Video Video Setup sub-menuLast Valid enables the source last selected The source that VideoCharacter Display Intelli Volume sub-menuIntelli Volume Character Input sub-menuRelationship between input source and listening mode Listening Mode Preset sub-menuListening Modes Input source signalsTHX Cinema DTS Neo6DTS-ES Discrete DTS-ES MatrixAudio Adjust Setup menu Audio AdjustAudio Adjust Pro Logic II Music Dimension Surround SetupSurr Mode Analog/PCM Surr Mode D.F.2chFront Effect THX SetupDecoder THX Surround EX Dolby DPreference menu Volume Setup sub-menuPreference OSD Position sub-menu Headphones Level Setup sub-menuOSD Setup sub-menu PreferenceListening to Radio Broadcasts Tuning into a radio stationListening to a stereo radio station FM mode FM Mode TuningListening to Radio Broadcasts Presetting a radio station Selecting a preset radio stationErasing a preset radio station Memory FM Mode EnterPTY program types in Europe What is RDS?Listening to RDS broadcasts European models only Performing a TP scan Preset RT/PTY/TP EnterListening to RDS broadcasts Displaying Radio Text RTTemporarily turning off the sound Adjusting the bass and trebleListening with headphones Enjoying music or videos with the TX-DS797Entering names for input sources and tuner stations Changing the listening modeDirect Setup Enter Enjoying music or videos with the TX-DS797Temporarily changing the speaker output levels Switching the displayAdjusting the brightness of the front display Using the sleep time remote controller onlyAudio Changing the audio modeDirect Master Volume Enjoying the multichannel outputZone 2 OFF Playing music using the buttons on the TX-DS797Selecting an input source using the remote controller Enjoying music in the remote zonePress the CD input source button Recording a sourceREC OUT Start recording at the recording component as desiredControlling an Onkyo cassette tape deck Using remote controllerCalling up a preset radio station OverviewControlling an Onkyo CD player Using remote controllerDisc Stdby CD Mode Press the CD Mode buttonControlling an Onkyo DVD player Controlling an Onkyo MD recorder SAT, CABLE, VCR, and TV Mode buttonsOn Stdby MD Mode Press the MD Mode buttonDisplay When entering the code of Onkyo DVD playersLearning a pre-programming code Learning a pre-programming codeCable Learning a pre-programming codePre-programming codes DVDCable Mode Cable Mode Operating your programmed remote controllerDVD Mode DVD Player Mode SAT Mode Satellite Tuner ModeOn Stdby VCR Mode VOL TV/VCR Muting Operating your programmed remote controllerVCR Mode VCR Mode TV Mode TV ModeLight Direct Mode Macro Macro Programming procedurePage SEND/LEARN indicator Mode buttons Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same Mode button againProgramming a Macro function Using a Macro functionWhat is a Macro function? Mode MacroRunning a Direct Macro function Using a Macro functionRcvr CD Mode Programming the Direct Macro functionDirect Macro Erasing a macro from the Mode Macro buttonPress the Mode Macro button again Erasing a direct macro from the Direct Macro buttonOperation Erasing all commands and macros that have been programmedMacro mode programming memo On Stdby EnterAmplifier Section Tuner Section SpecificationsTroubleshooting guide If one of the messages shown below appears Troubleshooting guideVideo and Audio Memo Memo Onkyo Europe Electronics GmbH Onkyo U.S.A. Corporation

TX-DS797 specifications

The Onkyo TX-DS797 is an iconic AV receiver that has left a lasting impression on home theater enthusiasts since its release. Known for its robust performance and extensive feature set, this receiver is designed to deliver an immersive audio-visual experience that can elevate any entertainment setup.

One of the standout features of the TX-DS797 is its impressive multi-channel amplification system. With a power output of 100 watts per channel, the receiver can drive a wide range of speakers, providing dynamic sound that fills the room. This power is complemented by Onkyo’s Wide Range Amplification Technology, which ensures clear and accurate sound reproduction across various frequencies. The receiver supports Dolby Digital, DTS, and THX audio formats, making it suitable for both movies and music.

The TX-DS797 is equipped with multiple inputs and outputs, allowing for extensive connectivity options. It includes six composite video inputs, three S-video inputs, and two component video inputs, making it easy to connect various devices such as DVD players, gaming consoles, and satellite receivers. Additionally, the receiver features a built-in AM/FM tuner and supports recording outputs, giving users the flexibility to manage their media.

In terms of audio processing, the TX-DS797 boasts a 24-bit/192 kHz DAC, ensuring high-fidelity audio playback. The receiver also supports various audio codecs, providing users with a diverse listening experience that caters to different preferences. The inclusion of the Onkyo’s proprietary DSP (Digital Signal Processing) allows for accurate simulation of different sound environments, enhancing the immersion during movie watching and music listening.

Furthermore, the TX-DS797 is designed with user convenience in mind. Its intuitive on-screen display makes navigation through various settings and configurations a straightforward process. It also comes with a remote control, allowing users to manage their audio-visual setups from the comfort of their couch.

With a sleek and modern design, the Onkyo TX-DS797 not only performs well but also adds an aesthetic appeal to any home theater environment. It offers an excellent balance of power, versatility, and advanced technology, making it an enduring choice for audiophiles and casual listeners alike. Whether you are watching a blockbuster film or listening to your favorite music, the TX-DS797 delivers an exceptional performance that is hard to beat.