Troubleshooting
Printer does not function at all.
The film pack is not in the printer.
•Load the film pack into the printer.
The battery in the film pack is too low or dead.
•Replace the film pack.
Environment is very cold, causing reduced performance.
•If using the printer at temperatures below 55°F(13°C), keep film packs warm, then load just before use.
Printer does not print when I press Print .
The default image number is “000.”
•Select an image to print.
The film pack is jammed.
•Open the film compartment, clear the jam, and turn the printer on. The exposed frame ejects.
The film pack is empty.
•Insert a new film pack.
The battery in the film pack is too low or dead.
•Replace the film pack.
Some images printed, but then the printer stopped.
A partially used film pack was loaded which defaults the film count to 10. Although the printer allowed you to program 10 images, the film ran out.
•Insert a new film pack.
The battery in the film pack is too low.
•Replace the film pack.
User’s Guide
Troubleshooting
11