Troubleshooting
| Problem | Possible Solution |
|
| No picture. | Make sure the power cord is connected | |
|
| securely. | |
|
| Turn on the power of the PDP. | |
|
| Check DVI cable connections. | |
|
|
| |
| Cannot see any information | Turn off AC power of the PDP and the | |
| on the display (OSD and video) | video input source and turn on again. | |
| and the power LED is blue. |
|
|
|
|
| |
| No color. | Press MODE to select the desired Picture | |
|
| Mode. | |
| Color is not correct, | Adjust the Picture Mode options in the | |
| Dark picture. | Video menu. | |
| _____________________________________________________________ | ||
| Remote control does not | The batteries could be weak. Replace the | |
| operate. | batteries. | |
|
| Check the polarity of the batteries. | |
|
| Press the TV button. | |
|
| Point the remote control at the remote control | |
|
| sensor of the PDP. | |
|
| Install the PDP away from fluorescent lights. | |
|
|
|
|
For service, support and warranty information, visit www.polaroidelectronics.com or in the US call
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the
22