Onkyo DV-S155X, PR-155X, ST-V10X, SWA-V10X Linear PCM Out setting, Dynamic Range Control setting

DV-S155X-En.book Page 67 Saturday, July 24, 2004 2:20 PM

Advanced setup—Continued

• Digital output

This specifies whether digital audio will be output from the DV-S155X’s digital output jack. On: The digital jack will output digital audio signals.

Off: The digital jack will not output digital audio signals.

■Linear PCM Out setting

Down Sample On:

Choose this setting if you’ve connected the DV-S155X to an AV amp that does not support 96 kHz audio. (This is the default setting.)

Down Sample Off:

Choose this setting if you’ve connected the

DV-S155X to an AV amp that supports 96 kHz audio.

Note

•Some discs will forcibly convert to 48/44.1 kHz even if you choose “Down Sample Off,” or may not produce digital output.

•96 kHz linear PCM audio from a copy-protected DVD video is automatically converted to 48 kHz for output, or is output as analog audio.

•This setting applies to both “Digital Out/Digital1” and “Digital Out/Digital2.”

■Dynamic Range Control setting

The Dynamic Range Control setting lets you compress the audio so that loud sounds will be softer and soft sounds will be louder. This is convenient when you find it difficult to hear the dialog of a movie, or when watching a movie late at night.

Off (default):

Dynamic Range Control will be off.

On:

Dynamic Range Control will be on. Loud sounds such as explosions will be softer, and dialog will be easier to hear.

Note

•Dynamic Range Control only works for Dolby Digital sound.

•This setting automatically reverts to Off when the DV-S155X is turned on.

67