Digital Echo

Front Panel Descriptions and Functions

��

�

��

�

��

�

��

17.POWER BUTTON - Use this button to turn the DA-8909RV ON or OFF.

18.REVERB VOLUME - Controls the output level of the reverb effect. Select between a range of 0 - 99% by turning the control clockwise to increase the reverb output level and counter-clockwise to decrease the reverb output level.

19.DELAY - This control adjusts the length of time for each ECHO interval, or REPEAT. Rotating the DELAY control clockwise will increase the DELAY, creating the effect of more “space.”

20.REPEAT - This control adjusts the number of ECHO repeats applied to the signal until the effect decays, or fades out.

21.ECHO - This control is the overall level for the ECHO effect. Rotate clockwise to increase the amount of ECHO effect applied to the signal, and counter-clockwise to decrease.

22.MIC TONE - The BASS control adjusts the low end of the microphone mix from MIC 1, 2

and 3, while the TREBLE control adjusts the high end of the mix.

23.MIC VOLUME - These level controls for MIC 1, 2 and 3 should be adjusted individually to get the best mix when multiple performers are singing. Rotate clockwise to increase and counter-clockwise to decrease VOLUME for each mic.

24.MIC 1, 2, 3 INPUTS - Connect your 1/4” cabled microphones here.