Music Tone controls

Front Panel Descriptions and Functions

��

�

��

�

��

�

��

��	��	��	��	��	��	��	��	��
	��		��			��		��

��

7.SPEAKERS A/B - These buttons switch between 2 sets of SPEAKER OUTPUT.

8.LED GAIN - Select between a HIGH or FLAT LED display mode for different effect and visibility.

9.VOCAL CANCEL/VOCAL PARTNER - With Multiplex media, lead vocals and music are recorded in separate left and right stereo channels. When VOCAL CANCEL is selected, the LED will illuminate and the lead vocal channel will be removed, leaving only a duplicated instrumental track to left and right. When VOCAL PARTNER is pressed, LED will illuminate and the vocal track will only be activated while there is no microphone input. In other words, while the Karaoke singer is performing, the vocals will never drop entirely out, keeping the action going.

VOCAL ENHANCER - Because the DA-8909RV allows you to “TUNE” the frequency and mix, or “PROCESS” of your mi- crophone output, it is a more powerful EQ tool than standard Bass and Treble controls.

10.VOCAL ENHANCER ON/OFF - This button activates or deactivates the VOCAL ENHANCER processor feature. Try using this button to do an A/B comparison of a processed and unprocessed signal while someone sings into the microphone. This is helpful for fine-tuning and system diagnostics.

11.HIGH - Similar to a Treble control, this boosts the HIGH frequencies in your EQ, from 0 to 10.

12.PROCESS - This control is similar to a Balance control for the EQ, where you can select between a mix predomi- nantly “High end” mix and a bassier “Low end” mix.

13.TUNE - This control allows you fine tune specific frequencies more precisely, by setting the lower cutoff frequency of the high-pass filter between 1kHz and 8kHz. Fortunately, you can still use it without understanding what that means. The best way to use this control is by adjusting it while someone is singing into the microphone to find that “sweet spot” where the EQ sounds clean (not harsh, without distortion) and well-balanced.

14.LOW - Similar to a Bass control, this boosts the LOW frequencies in your EQ, from 0 to 10.

15.LOUDNESS ON/OFF - For an instant Volume/Gain, the LOUDNESS button is an easy way to improve your mix when you need an extra boost. Perfect for varying volume controls between tracks or singers.

16.BASS/TREBLE - The BASS control adjusts the low end of your source music and the TREBLE control adjusts the high end.