Microsoft & IBM Networks (SMB)
This section outlines the required configuration settings for running the Network Cache Changer
SMB (Server Message Blocks) is a protocol that uses NetBIOS. NetBIOS may be transported over several different network protocols. The
ÖSMB over NetBIOS/NetBEUI
ÖSMB over NetBIOS/TCP/IP (also designated NBT) Both protocols are enabled by default. However, you can disable the protocols not needed by setting the appropriate configuration parameters.
If you are using the
Öpp. 20 – 24 - NetWare (NCP)
Öpp. 25 – 26 - UNIX (NFS)
Öpp. 27 – 28 - Web (HTTP)
18
Network Settings
Use the Administration pages within the
SMB Server Name
The default SMB server name is PIONEER<nnnnnn>, where <nnnnnn> is the last six digits of the
Wizard
The installation wizard is a convenient way to set up the
1.Click Network Settings.
2.Click Wizard and the Wizard dialog appears
3.Choose Windows (SMB) to set up the
4.Click Start to proceed with the installation and follow the instructions on the screen
5.When finished, click Close
6.Click Detailed View to verify the settings
NOTES:
7It is recommended that you disable all protocols that you do not intend to use
7Online help is available for all parameters
7The parameter list is described in detail in “Appendix A - Parameter List” on page 40