Appendix B: Troubleshooting
Reset Button
To restore the default settings using the Reset button:
1.Turn off the
2.Press and hold the Reset button while you switch on the
Reset button
3.Release the Reset button and wait at least two seconds (one flash of the Network indicator)
4.Press and hold the Reset button for at least five seconds until the Network indicator remains constantly lit
5.Turn off the
The factory default setting are now restored.
The Others
7When some 100Base switching HUBs are used, Collision LEDs may light at
7With some HUBs, the Link LED may not light. Reseat the cable until this LED light is on.
7If a 'write error on hard drive' mesage is returned during caching,
7When mulitple external
7If there are problems when using a Web Browser with an earlier release than Internet Explorer 3.0x, please upgrade the Web Browser to IE4.0x or an equivalient.
7Once File Rights (Windows Sharing) of the root directory are changed to Not Shared, the shared name is changed to NoName. Only restoring the factory defaults setting or editing the Root.txt file will clear this condition. The Root.txt file is found in the System/VolumeProperties folder.
49