Pioneer ML310 manual Select the Advanced Options menu

Page 42

10.Remove the system board.

To replace the component, reverse the removal procedure.

After you replace the system board, you must re-enter the server serial number and the product ID.

1.During the server startup sequence, press the F9 key to access RBSU.

2.Select the Advanced Options menu.

3.Select Serial Number. The following warning is displayed:

Warning: The serial number should ONLY be modified by qualified service personnel. This value should always match the serial number located on the chassis.

4.Press the Enter key to clear the warning.

5.Enter the serial number.

6.Select Product ID. The following warning is displayed.

Warning: The Product ID should ONLY be modified by qualified service personnel. This value should always match the Product ID located on the chassis.

7.Enter the product ID and press the Enter key.

8.Press the Esc key to close the menu.

9.Press the Esc key to exit RBSU.

10.Press the F10 key to confirm exiting RBSU. The server will automatically reboot.

Removal and replacement procedures 42

Image 42

Contents May 2006 Fourth Edition Part Number Audience assumptions Contents Acronyms and abbreviations Index Parts only warranty service Customer self repairRéparation par le client CSR Service de garantie pièces seules Riparazione da parte del clienteServizio di garanzia per i soli componenti Reparaciones del propio cliente Servicio de garantía exclusivo de componentes Garantieservice Parts Only Reparo feito pelo clienteServiço de garantia apenas para peças Customer self repair Customer self repair Customer self repair Customer self repair Illustrated parts catalog Mechanical componentsPage Page Illustrated parts catalog System components System componentsMass storage devices Page Illustrated parts catalog Removal and replacement procedures Safety considerationsRequired tools Server warnings and cautions Preparation procedures Power down the serverAccess panel Hot-plug Scsi hard drive Hot-plug SAS and Sata hard drivesNon-hot-plug hard drive cage Hard drive non-hot-plug Hot-plug SCSI, SAS, or Sata hard drive cage Hot-plug Scsi backplaneHot-plug SAS or Sata backplane Diskette drive CD-ROM/DVD-ROM drivePower supply Air baffleDimm Page Processor assembly Removal and replacement procedures PCI expansion board Fan assembly Power button/LED boardBattery System board Select the Advanced Options menu Cabling Hot-plug Scsi hard drive cablingNon-hot-plug Scsi hard drive cabling Hot-plug Sata hard drive cablingNon-hot-plug Sata hard drive cabling SAS hard drive cablingDiagnostic tools Array Diagnostic Utility HP Insight DiagnosticsSurvey Utility ROMPaq disaster recovery Integrated Management LogComponent identification Front panel componentsFront panel LEDs and buttons Rear panel components Rear panel LEDsSystem board components System maintenance switch System board LEDs System LEDs and internal health LED combinations Scsi IDs Hot-plug Scsi hard drive LEDs Hot-plug Scsi hard drive LED combinations LEDSAS and Sata hard drive LED combinations Fans Description Processor fan Component identification Specifications Server specificationsEnvironmental specifications Dimensions CD-ROM drive specifications Hard drive specificationsDVD-ROM drive specifications Specification Value Stop time Single 30 s multisession Acronyms and abbreviations RAID Index Index