Planar PE171 manual Power Management System, Interface for Arm Applications

Page 6

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.

When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow.

Optional Mounting Alternatives

Detaching LCD Monitor from Its Stand

Unscrew screws n the swivel base support column and pull downo the hinge to release.

Figure 1-3

Interface for Arm Applications

Before installing to mounting device, please refer to Fig.1-3.

The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).

Figure 1-4

5

Image 6
Contents PE171 Table of Contents Preface FCC Statement WarningInstallation UnpackingConnecting the Display Connecting the LCD Monitor and BaseViewing Angle Adjustment Connecting the AC PowerPower Management System Interface for Arm ApplicationsUser Controls Adjusting the Monitors DisplayDisplay Controls OSD Function MenuFunction Description IconUser Specifications Technical InformationSignal Power Supply AC InputSize and Weight Plug & Play External ConnectionStandard Timing Table VGA-GRAPHTroubleshooting Planar Systems, Inc