Planar PE171 manual Technical Information, Specifications

Chapter 3 Technical Information

Specifications

LCD Panel

Size	17" (43 cm)
Display Type	Active matrix color TFT LCD
Resolution	1280 x 1024
Display Dot	1280 x (RGB) x 1024
Display Area (mm)	337.92 x 270.336 (H x V)
Display Color	262K
Brightness	260 cd/m2 (typical), 200 cd/m2 (min.)
Contrast Ratio	450:1 (typical)
Response Time	Ta=25°C Tr+Tf=12ms
Lamp Voltage	650 Vrms (typical)
Lamp Current	7.0 mA rms. (typical)
Viewing Angle	Vertical: -60° ~ +75°
Display Colors	Horizontal: -75° ~ +75°
	16M (6 bit + FRC)

Video

Input Signal	Analog RGB 0.7Vp-p/ Digital TMDS
Input Impedance	75 Ohm ± 2%
Polarity	Positive, Negative
Amplitude	0 - 0.7 ± 0.05 Vp
Multi-mode Supported	Horizontal Frequency: 24 ~ 80 KHz
	Vertical Frequency: 49 ~ 75 Hz

Control

Power switch	On/Off switch with LED indicator
(hard and soft types)

OSD

Brightness	Digital
Contrast	Digital
Horizontal Position	Digital
Vertical Position	Digital
Phase	Digital
Clock	Digital
Display Mode Setup	Use EEPROM to save settings in memory
OSD Format	26 characters x 15 rows

Power Management

Mode	Power Consumption*	AC Input	LED Color
On	48W maximum	240 VAC	Green
Off	3W maximum	240 VAC	Yellow
Soft switch off	3W maximum	240 VAC	Dark
Disconnected	3W maximum	240 VAC	Yellow: Standby, Suspend, Off
			Dark: DC Power off
Hard switch off	0W	240 VAC	Dark

* Meeting VESA DPMS requirements measured from AC Input end of AC power cord.

Sync Input

Signal	Separate TTL compatible horizontal and vertical synchronization
	Digital TMDS
Polarity	Positive and negative
	8