10
Start Your Installation
¡Remove the Back Cover
Please follow these instructions to remove the cover on the back panel of the LCD so that you can connect the cables in “Connector Ports A.”
1.To remove the back cover, follow the arrows in Figure A and press with both your thumbs. The cover should be removed by pressing firmly along the edges while pulling on the cover.
2.Follow the instructions on P. 11 ( Figure 11.1 ) to connect the cables in “Connector Ports A.”
3.Fix the cover back to the LCD by pressing firmly until the tabs snap into place. You may also keep the cables in order by using the cable organizer.