Planar PT1550MX, PT1501MX, PT1500MX manual PT1505MU / PT1555MU Driver Install

Page 28

26

below:

1.Power on the computer.

2.Make sure that the RS232 or USB cable is connected to the computer.

3.Using Platform Builder, build an image file by following the step-by-step instructions found in the zipped file on the CD.

Please note: Do not plug in both RS232 and USB cables. Doing so may cause a driver conflict, making your touch screen idle.

PT1505MU / PT1555MU Driver Install:

The touch driver is located on the enclosed CD-ROM for these

OS: Windows® VISTA, XP, 2000, 98.

1.Be sure that USB cable is connected from the computer.

2.Power on the computer.

3.Load the touch screen driver CD.

4.Follow the step-by-step instructions as shown on pop-up windows.

Image 28

Contents Touch Screen LCD Monitors Important Recycle Instructions Table of Contents Page Precautions Usage NoticeIntroduction About PT1500MX / PT1550MX / PT1501MX / PT1505MU / PT1555MUTouch Screen for PT1501MX Touch Screen for PT1500MX / PT1550MXTouch Screen for PT1505MU / PT1555MU Page Package Overview Installation Product OverviewKensington Security Slot Vesa Mount your monitor Remove the Deskstand Start Your Installation Figure aConnecting the Display Figure Page User Controls Front Panel ControlsHow to Use the OSD Menus On-Screen Display Menus Main OSD MenuTroubleshooting AppendixNo Signal Product Dimensions Frequency Mode Resolution KHz Compatibility ModesTouch Screen Driver Installation PT1500MX / PT1550MX / PT1501MX Install InstructionsPT1501MX Optional Capacitive Calibration Tool Install Using the RS232 connection Using the USB connectionExpress CustomPT1505MU / PT1555MU Driver Install Planar Support Product Registration and Technical SupportToll or long distance charges may apply Planar Systems, Inc