Planar PQ170 manual Specifications

Specifications

Display	Flat Panel Active matrix-TFT LCD
	17 inch diag viewable, Anti-Glare coating, 0.26 mm pixel pitch
	Horizontal Viewing Angle: -70 to +70 deg typical
	Vertical Viewing Angle: -60 to +60 deg typical
Sync Input	Horizontal Freq.	30 - 83kHz (Automatic)
	Vertical Freq.	56 - 75Hz (Automatic)
	Input Form	Separate TTL, Positive/Negative
		Composite TTL Positive/Negative
		SOG (Sync On Green)
	Signal Input	15 pin D-Sub Connector
Video Input
	Input Form	RGB Analog (0.7Vp-p/75ohm)
	Max	VESA 1280 x 1024@75Hz
Resolution
	Recommend	VESA 1280 x 1024@60Hz
	DDC 2B
Plug&Play
Power	Normal	: 40W
Consumption	Stand-by/Suspend	≤	2W
	DPMS Off	≤	2W
	Full Up Position			Folded Position
Dimensions
&Weight
(with tilt stand)
	Width 38.6 cm / 15.20 inches			38.6 cm / 15.20 inches
	Height 37.2 cm / 14.65 inches			40.2 cm / 15.83 inches
	Depth 15.2 cm / 5.98 inches			6.6 cm / 2.60 inches
	Net	4.3 kg (9.48 lbs)
	Tilt	0˚ to 25˚
Tilt Range
Power Input	AC 100-240V~ 50/60Hz 1.0A
	Operating Conditions
Environmental
Conditions
	Temperature	10˚C to 35 ˚C
	Humidity	10 % to 80 % non-Condensing
	Storage Conditions
	Temperature	-20˚C to 60 ˚C
	Humidity	5 % to 95 % non-Condensing
Brightness	250 cd/m2 typical
Contrast	400:1 typical
Power cord	Wall-outlet type
Regulations	UL, cUL, FCC

NOTE

Information in this document is subject to change without notice.

A13