Planar PQ170 manual Using the Computer, Power Cord, Signal Cable

Page 5

Connecting the Display

Using the Computer

1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection.

2. Connect the power cord into a proper power outlet that is easily accessible and close to the display.

NOTE

This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown.

Power Cord	Signal Cable
	Analog signal
	D-sub*

** Varies according to model. Wall-outlet type

PC-outlet type*

PC

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

A4

Image 5

Contents Planar LCD Monitor PQ170 Manual On Safety Important PrecautionsOn Repacking On InstallationOn Cleaning Folding the stand base Connecting the DisplayUnfolding the stand base Signal Cable Using the ComputerPower Cord ControlFunction Control Panel FunctionsFront Panel Controls Auto adjustment function Direct Access FunctionControl MenuScreen Adjustment On Screen Display OSD Control AdjustmentMain menu Sub menu Reference On Screen DisplayOSD Selection and AdjustmentTo customize the color of the screen To adjust the brightness and contrast of the screenTo adjust the position of the screen To improve the clarity and stability of the screen Do you see a Controls Locked message on the screen? TroubleshootingNo image appears Screen color is mono or abnormal Display image is incorrectScreen blinks Specifications Kensington Security Slot- optional Preset Modes ResolutionVesa wall mounting Planar SYSTEMS, INC