Planar PQ191M manual Connecting the Display, Using the Computer, Power Cord

Page 4

Connecting the Display

Using the Computer

1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection.

2. Connect the power cord into a proper power outlet that is easily accessible and close to the display.

NOTE

This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown.

Power Cord

Signal Cable

Digital signal

- DVI*

Analog signal

D-sub*

** Varies according to model. Wall-outlet type

PC-outlet type*

PC

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

A3

Image 4

Contents Planar LCD Monitor PQ191M Manual Important Precautions On SafetyOn Cleaning On InstallationOn Repacking Using the Computer Connecting the DisplayPower Cord Front Panel Controls Control Panel FunctionsControl Function Direct Access Function Auto adjustment functionControl MenuOn Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Main menu Sub menu ReferenceTo adjust the position of the screen To adjust the brightness and contrast of the screenTo customize the color of the screen Clockphase To improve the clarity and stability of the screenNo image appears TroubleshootingDo you see a Controls Locked message on the screen? Screen blinks Display image is incorrectScreen color is mono or abnormal Specifications Vesa wall mounting Preset Modes ResolutionKensington Security Slot- optional Signal Connector Pin Assignment Pin SignalDVI-IMaking use of USB Universal Serial Bus Optional USB connectionUSB Specifications USB standardCommunication speed USB portPlanar SYSTEMS, INC