Monitor Specifications
Displays
Size | 23” diagonal (583 mm) |
|
|
Display type | Active matrix color TFT LCD panel |
|
|
Resolution | 1920 x 1200 (WUXGA) |
|
|
Display dot | 1920 x (RGB) x 1200 |
|
|
Display area (mm) | 495.36 x 306.60 (H x V) |
|
|
Pixel pitch | 0.258 mm |
|
|
Brightness (2D mode, mirror raised) | 250 cd/m2 (typical), 200 cd/m2 (minimum) |
Brightness (Stereo/3D Mode) | 80 cd/m2 (typical, through the glasses) |
Contrast ratio (2D mode, mirror raised) | 800:1 (typical) |
|
|
Response time | 12 ms (3 ms rise, 9 ms fall) |
|
|
Response time (gray to gray) | 8 ms (typical) |
|
|
Display color palette | 16.7 million colors |
|
|
Refresh rate | 60 – 85 Hz (60 Hz recommended) |
|
|
Power requirements, input voltage | Single phase, 100 – 240 VAC (50/60 Hz) |
|
|
Power requirements, input current | 1.2 A maximum per monitor |
|
|
Power supply | Internal |
|
|
Power consumption | 110 W (max) per monitor, 220 W total |
| (4 W total standby) |
|
|
Product approvals | UL/CUL, CSA, |
|
|
MTBF | 50,000 hours at 40°C |
|
|
Video
Input signal | Analog (VGA), Digital |
| Composite, |
|
|
Input impedance | 75 Ohm ± 2% |
|
|
Sync input signal | Digital TMDS, separate TTL compatible |
| horizontal and vertical synchronization |
|
|
Polarity | Positive, negative |
|
|
Horizontal scan | 30 – 85 kHz (Digital) / 30 – 95 kHz (Analog) |
|
|
Vertical refresh | 60 Hz (Digital) / 60 – 85 Hz (Analog) |
|
|
Plug and Play
The unit supports the VESA DDC2B functions of Plug and Play.
SD2320W | 10 | User's Guide |