Installation
Before you unpack your monitor, prepare a suitable workspace. You need a stable and level surface near a grounded wall outlet in an area which is relatively free of glare from sunlight or other sources of bright light. The monitor is cooled by natural convection (it has no fan). For optimum performance, do not block the cooling vents.
While unpacking the monitor, inspect it and other package contents for shipping damage that could cause a fire or shock hazard. Immediately report any shipping damage to the carrier or transportation company and contact customer service for assistance. Keep all packing material in case you need to ship or store the monitor in the future or in case of return.
After you unpack the monitor, make sure the following items are included (refer to “Ordering Information” for part numbers):
∙Monitor with 1.5 meter (5 ft.)
∙1.5m (5 ft.) stereo audio cable
∙AC adapter with cable. (CAUTION: AC Adapter must be plugged into a
GROUNDED power outlet.) Output power: 12Vdc to a 4 pin male locking
∙Power cord (medical grade) which connects from AC mains to AC adapter.
∙Touchscreen cable if monitor has touchscreen option.
∙This operations manual
Note: Your system provider may offer alternative cords or cables depending on the installation requirements and local geography issues.
6 | Operations Manual |