Planar D6015TM manual Connecting Video, Connecting Optional Stereo Speakers

Connecting Video

With the power to your computer and the monitor off, connect the supplied video cable from the monitor to the computer’s VGA port (Figure 6).

Figure 6: Connecting the Monitor to Your System

Make sure the VGA cable connector is securely connected to the VGA port on your computer. Tighten the connecting screws to ensure a secure connection. Turn the monitor on first, then turn on the computer. The LED on the monitor will flash until it receives a video signal from the system.

Connecting Optional Stereo Speakers

Connect the supplied audio cable to the line-out port of your computer’s audio card. Next connect the other end of the audio cable to the monitor’s line-in port (Figure 7, shown with video cable also attached).

Figure 7: Connecting the Stereo Speakers

Adjust the sound volume of the stereo speakers by using either the speaker volume control function on the On-Screen Display (OSD) or the Adjustment increase and decrease buttons (see Figure 8) on the front of the monitor.

Note: Planar does not recommend using the audio from the monitor as your exclusive audio source in medical applications.

Operations Manual (OM700-02) 11