Planar Tk7, Tn4 manual Attach the Mounting Fixture

Attach the Mounting Fixture

Use four 4 mm 0.7 pitch stainless steel screws of the appropriate length for a tight fit. You need 4 mm of the screw’s threads engaged in the Invitium’s VESA plate for proper support.

1Install the mounting fixture. (Refer to the vendor documentation.)

2Attach the Invitium to the fixture using the VESA panel on the back of the Invitium.

•If the VESA panel on the fixture has slotted upper screw holes, secure the top two screws to the Invitium’s VESA panel, and then slide the Invitium onto the fixture.

•If the holes are not slotted, have another person support the Invitium against the fixture while you secure the screws.

Installing the In vitium 7