Planar PS466OT user manual Turning the PS4660T/PS5560T On, Turning the PS4660T/PS5560T Off

Page 29

Turning the PS4660T/PS5560T On

Turning the PS4660T/PS5560T On

1Insert the power cord into the display and the power outlet.

2Ensure the AC switch is set to “—“.

3Press the power button on the remote or side control panel.

Turning the PS4660T/PS5560T Off

With the power on, press the power button on the remote or side control panel to put the LCD panel in a standby mode. To turn off power completely, turn the AC switch to “O” or disconnect the AC power cord from the power outlet.

Note: If there is no signal for a certain period of time, the LCD panel will automatically go into standby mode.

Adjusting the Volume

1Using the remote, press the VOLUME - or VOLUME + to increase or decrease the volume.

2Press the MUTE button to temporarily turn off all sound. To restore the sound, press the MUTE button again.

Selecting the Input Source

1Do one of the following:

• Using the remote, press the desired source button (VGA, HDMI, DVI or

DISPLAYPORT).

• Press the source button on the PS4660T/PS5560T’s keypad. Use the arrow buttons (▲ ▼) to select one of the following input sources and press ENTER:

VGA, HDMI, DVI or DISPLAYPORT.

VGA

HDMI

DVI

DisplayPort

PS4660T and PS5560T User Guide

25

Image 29
Contents Page Disclaimer Trademark CreditsTable of Contents Downloading Additional Documentation and Firmware Introduction Safety Precautions Safety InformationImportant Safety Instructions Burn-In Versus Temporary Image Retention What is Temporary Image Retention?Recommended Usage European Union Disposal Information Cooling Requirements Vesa Mounts, General DescriptionNormal Usage Guidelines Ambient Light Recommendations Cleaning the PS4660T/PS5560TPackage Contents Description Quantity Contents of the Accessory Kit PS4660T Front and Side DimensionsPS5560T Front and Side PS4660T RearPS5560T Rear Before You Begin Plan Your InstallationTools/Equipment List Other Things You May NeedConnectivity Prepare Your Installation LocationName Connector Key Descriptions OSD KeypadOSD Keypad Buttons LED Indicators Remote Control ReceiverLED On ConditionUsing the Display in Portrait Mode Using the Remote Control Menu Num Function DescriptionCont Changing the Remote Control BatteryLocking/Unlocking the OSD Menus Click Tap the screen once Using the Touch ScreenPerforming Basic Functions Quickly drag your finger flick in a desired direction Multi-Touch Functions Turning the PS4660T/PS5560T On Adjusting the VolumeTurning the PS4660T/PS5560T Off Selecting the Input SourceSubmenu OSD Menu Functions, Video Menus Audio Menu OSD MenusRTC Submenus Basic MenusAdvanced Menu System Menu Scheme Brightness Contrast Navigating Through the MenusVideo Menu Sharpness Saturation Hue Backlight Color Temp & Gamma Color Temperature & Gamma MenuGamma Color Temperature Default Default Volume Bass Treble Balance Hdmi Audio Input DP Audio InputDefault Hdmi Range -6~6Basic Menu Basic Menu/RTC Real Time Clock Menu Real Time Timer ModeTimer Mode User mode RTC Timer Mode UserTimer Mode Work Days mode RTC Timer Mode Work DaysTimer Mode All Days mode RTC Timer Mode All DaysOptions No, Yes Default No Auto Adjustment Image Position Phase ClockOptions On Default Off Advanced MenuOptions System Menu Following table shows the default settings for the LCD Default SettingsDisplay Port Signal CompatibilityTiming FH KHz FV Hz Specification SpecificationsHumidity Issue Check for the following TroubleshootingDocument Name Contents Accessing Planar’s Technical Support WebsiteDownloading Additional Documentation and Firmware Downloading Utility Software