EN
GETTING STARTED
BATTERIES
Batteries are not supplied with this product. You will need to purchase 2 x
Insert batteries before first use, matching the polarity as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. Press RESET after each battery change.
NOTE Do not use rechargeable batteries.
shows when batteries are low.
UNIT | LOCATION |
|
|
Main | Indoor Temperature Area |
|
|
Remote | Outdoor TemperatureArea. |
|
|
CHANGE SETTINGS
1.Press and hold MODE for 2 seconds to enter setting mode.
2.Press UP or DOWN to change settings.
3.Press MODE to confirm.
TABLE STAND OR WALL MOUNT
Insert the stand on the back of the product, or mount it on a wall with a nail.
REMOTE SENSOR
This product is shipped with a Sensor that collects temperature readings. Only one sensor can be used with this product.
6
RAR601 lab test R2 | 6 | 1/17/04, 4:47 PM |