Oregon Scientific PS-M03U user manual SET or Change the Clock, SET Alarm

Page 12

SET OR CHANGE THE CLOCK

1.Press SELECT to switch to the Clock Mode. The time will flash.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the 12/24-hour format, hour, and minute. Press UP or DOWN to change the setting. Press SELECT to confirm.

ALARM

When activated, the Melody Alarm starts quietly, then gradually becomes louder. It shuts off after two minutes. The LCD display lights up for the first

8 seconds.

EN

The Radio alarm turns on the Radio automatically. It will turn off after 2 hours.

SET ALARM

1.Press SELECT several times until the Alarm area flashes.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the hour, minute, and alarm type ( for Melody Alarm or for Radio Alarm). Press UP or DOWN to change the setting. Press SELECT to confirm.

If you choose , also select the melody (1 - 7) and volume level (Lo or Hi).

11

PS M03 English R18

11

7/16/03, 1:04 PM

Image 12
Contents PS M03 English Cover 30/03, 1111 PM Table of Contents About this Guide TOP and Battery Compartment View Descriptions Product OverviewBottom and Side View LCD Display Descriptions Back View Button Descriptions Remote Unit Descriptions AC Power Adapter Switch Between ModesGetting Started BatteriesChange Settings Remote Unit SET UPInstallation To Disable or Enable Auto Synchronization ClockReception Alarm SET AlarmSET or Change the Clock To Turn the Alarm OFF or on SnoozeCalendar SET DateMoon Phase BarometerBarometric Trend View the Last 24 Hours SET Unit and AltitudeWeather Forecast Temperature and Humidity Clear MIN / MAX RecordsSelect Remote Unit Channel Sensor Searching Comfort ZoneTrends SET UnitRadio AntennaVolume Switch AM/FM BandTuning Sleep TimerBacklight Continuous BacklightReset System Safety and CareTroubleshooting Problem Symptom RemedyClock Cannot Remove batteries Specifications TemperatureRelative humidity Radio-controlled clock Additional Resources EC-DECLARATION of Conformity