Oregon Scientific PS-M03U Volume, Switch AM/FM Band, Select Station, Tuning, Sleep Timer

Page 19

EN

VOLUME

Press UP or DOWN. There are 8 volume levels.

SWITCH AM/FM BAND

Press TUNING to enable auto tuning. Press again to switch AM/FM band.

SELECT STATION

Press STATION. There are 16 preset channels: 8 for FM and 8 for AM.

TUNING

Press TUNING. Then, press UP or DOWN to scan the available frequencies. Press and hold UP or DOWN for 2 seconds to auto-scan. The scanning will stop when an available frequency is found.

STORE STATION TO MEMORY

Press STATION for 2 seconds. The assigned number (1 - 8) will show in the Radio Area.

SLEEP TIMER

Press SLEEP. To change the timer length

(0 - 120 minutes in increments of 10) press UP or DOWN. The radio automatically turns off when the timer reaches 0. To manually turn off the radio, press

RADIO.

HEADPHONES

The headphone jack is located on the side of the unit. Use the headphones for stereo-quality radio listening.

18

PS M03 English R18

18

7/16/03, 1:04 PM

Image 19
Contents PS M03 English Cover 30/03, 1111 PM Table of Contents About this Guide Product Overview TOP and Battery Compartment View DescriptionsBottom and Side View LCD Display Descriptions Back View Button Descriptions Remote Unit Descriptions Batteries AC Power AdapterSwitch Between Modes Getting StartedRemote Unit SET UP Change SettingsInstallation Clock To Disable or Enable Auto SynchronizationReception SET Alarm AlarmSET or Change the Clock SET Date To Turn the Alarm OFF or onSnooze CalendarBarometer Moon PhaseBarometric Trend SET Unit and Altitude View the Last 24 HoursWeather Forecast Clear MIN / MAX Records Temperature and HumiditySelect Remote Unit Channel Comfort Zone Sensor SearchingAntenna TrendsSET Unit RadioSleep Timer VolumeSwitch AM/FM Band TuningContinuous Backlight BacklightSafety and Care Reset SystemProblem Symptom Remedy TroubleshootingClock Cannot Remove batteries Temperature SpecificationsRelative humidity Radio-controlled clock Additional Resources EC-DECLARATION of Conformity