EN
GETTING STARTED
BATTERIES
Batteries are supplied with this product. Replace them whenever the low battery signal (
) displays. Remove the battery compartment lid on the back of the speakers, and insert the batteries.
Be sure to match the correct polarity, as shown in the battery compartment. Before you close the lid, press the RESET button with the point of a blunt object (such as a ball point pen).
NOTE Do not use rechargeable batteries.
AC POWER ADAPTER
An AC power adapter is supplied for use with the main unit. It is recommended for use with the Radio. The jack is located on the side of the unit.
NOTE If the AC power becomes unavailable, the unit will automatically switch to battery power.
SWITCH BETWEEN MODES
Press SELECT. The selected mode will flash. The display will stop flashing if no key is pressed within 5 seconds.
CHANGE SETTINGS
Press and hold SELECT for 2 seconds. Then, press UP or DOWN to change each setting. Press SELECT to switch between options.
6