EN
SET OR CHANGE THE CLOCK
1.Press SELECT to switch to the Clock Mode. The time will flash.
2.Press and hold SELECT for 2 seconds to enter the setting mode.
3.Select the
ALARM
When activated, the Beep alarm starts quietly, then gradually becomes louder. It shuts off after two minutes. The LCD display lights up for the first 8 seconds.
The Radio alarm turns on the Radio automatically. It will turn off after 2 hours.
SET ALARM
1. Press SELECT several times until the Alarm area flashes.
2.Press and hold SELECT for 2 seconds to enter the setting mode.
3.Select the hour, minute, and alarm type (
for Beep Alarm or 
for Radio Alarm). Press UP or DOWN to change the setting. Press SELECT to confirm. If you choose 
, use the radio control buttons to select the AM/FM band, radio station and volume level (
11).
4.Press SELECT again when you are finished.
8