Polaroid PV 360 specifications Lamp, Message table, Screen displays

Page 32

Cleaning the Air filter (continued)

3 Cleaning the air filter with a vacuum cleaner

4 Installing the air filter

When the air filter becomes clogged with dust, etc., the projector power may turn off to prevent the internal heat level rising. (The lamp indicator color changes to red.)

Do not operate the projector with the air filter removed. (If used with the air filter removed, dust can enter the LCD panel and produce an adverse effect on image quality.)

Lamp

The light source lamp has a service life.

When used for an extended time, the images may become darker and the colors may deteriorate.

A malfunction could occur if the projector is used in this condition, so replace the lamp with a new one.

The following indicator or a message which appears when the power is turned on will indicate when the lamp should be replaced.

At such time, it is necessary to replace the lamp with a new one. For lamp replacement, please contact your dealer or service company.

Even when the lamp is at a high temperature, the power to the projector may cut off to prevent an excessive temperature increase inside the projector. (The POWER indicator turns off.) Turn off the MAIN POWER switch, wait for some 20 minutes and turn on the MAIN POWER switch again. If the projector is not recovered after turning on the MAIN POWER switch, please contact your dealer or service company.

Message table

Screen displays

The following messages are displayed on the screen.

CHANGE THE LAMP“CALL The total lamp usage time is nearing the service life of the lamp. Replace with a new lamp.

A MAINTENANCE PERSON”

The lamp will turn off automatically when the lamp replacement time has been exceeded. *1

“CHANGE THE LAMP”

The total lamp time is nearing the lamp replacement time. After (*) hours, the lamp will turn

“CALL

off. Quickly replace with a new lamp. *1

A MAINTENANCE PERSON”

*Indicates the number of hours until the lamp turns off automatically.

“THE POWER WILL

 

TURN OFF AFTER * hr.”

 

 

 

Blinking of

The total lamp time has exceeded the replacement time. The indicator will blink for

“CHANGE THE LAMP”

approximately 10 min. and then turn off automatically. Replace with a new lamp.

 

 

NO INPUT IS DETECTED

There is no signal input (refer to pages 22, 23).

 

 

 

SYNC IS OUT OF RANGE

The current horizontal or vertical frequency cannot be used by this projector (refer to pages 23, 24).

 

*1 This display will disappear after 3min. but will reappear when the power is turned on again.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Outline FeaturesContents For the Customers in U.K Video signal cables Power cordBefore Use Video inputsIf a problem should occur Do not install on an unstable surfaceDo not look through the lens when the lamp is on Use only the indicated power supplyDo not allow the laser beam to enter the eyes Handle the power cord with careDo not position the power Care and maintenance Battery usageClean the projector interior once every two years Avoid installation in humid or dusty locationsSound volume Avoid excessively hot locationsLens care Cabinet careChecking the package Contents Names and functions of each partConnecting to the AC in jack Names and functions of each partRemote control transmitter Names and functions of each part1Remove the battery cover Battery usage cautions3Close the battery cover Remote control usage cautions 2Loading the batteriesUsing the adjusters InstallationTypical LCD Projector and Screen Installation Turn on the main power switch of the projector I on Turn on the power to the connected equipmentBasic operations To projectPress the STANDBY/ON button for approximately 1 sec Turning off the powerPlug & Play Press the Freeze button Cancelling the Freeze functionFreeze function Magnify function Changing the magnification ratioMoving the display area Returning to normal displayPress the Menu Adjustments and functionsReturning to the initial settings SET UP Using the Setup MenuInput Image OPT Connection to the video signal terminals Connection to the RGB signal terminalInput signals Signal input jacksConnection to the RGB signal terminal Example of computer signalConnection to the RGB signal terminal Initial set signalsConnecting the USB Connection to the control signal terminal Mouse functionsConnection to the control signal terminal Control signal jackRS232C communication Command data chart System VideoRequesting projector status Example of system setup Cleaning the Air filterScreen displays LampMessage table When you think something wrong IndicatorsDimensional Diagram About the warranty and after-service

PV 360 specifications

The Polaroid PV 360 is a versatile and innovative device that has captured the attention of photography enthusiasts and casual users alike. Known for its unique blend of classic and modern design elements, this digital camera provides a user-friendly experience while delivering high-quality images.

One of the standout features of the PV 360 is its 3-inch LCD screen that offers a clear and vibrant display for framing shots and reviewing images. The screen's brightness and color accuracy make it easy to navigate through menus and settings even in bright sunlight. Its intuitive interface allows users to quickly access various shooting modes and settings, making it an ideal companion for both beginners and seasoned photographers.

The camera is equipped with a powerful lens that allows for high-resolution images with exceptional clarity. With a resolution of up to 16 megapixels, users can capture intricate details whether shooting portraits, landscapes, or action shots. Additionally, the PV 360 boasts a 5x optical zoom, giving photographers greater flexibility in composing their shots without sacrificing quality.

Another notable feature of the Polaroid PV 360 is its dual functionality, allowing users to shoot still images as well as videos. With 1080p Full HD video capabilities, the camera enables users to create vivid motion footage, perfect for capturing memorable moments in their lives. The built-in image stabilization technology helps reduce shaking and blurriness, ensuring smooth and professional-looking video playback.

The PV 360 incorporates several advanced technologies. Its auto-focus system ensures that subjects are sharp and well-defined, making it suitable for fast-paced shooting conditions. Furthermore, the camera includes various scene modes that automatically adjust settings based on the environment, such as a night mode for low-light conditions and a sports mode for capturing fast-moving subjects.

Connectivity options are another strong point for the PV 360. It features Wi-Fi capabilities, allowing users to transfer images easily to their smartphones or tablets for sharing on social media. Built-in editing tools also provide the opportunity to enhance photos directly from the camera.

Overall, the Polaroid PV 360 stands out as a feature-rich device that combines quality, functionality, and user-friendliness, making it a great choice for anyone looking to delve into the world of digital photography. Whether for capturing everyday moments or adventures, this camera is poised to deliver an enjoyable and satisfying photography experience.
Top Page Image Contents