EN |
|
|
|
|
| ACTIVATING / DEACTIVATING THE ALARM | |||
|
| |||
|
| To activate the alarm on, press the | button. (The alarm | |
|
| bell icon | will appear to the left of the alarm time). | |
|
| To deactivate the alarm, press the | button so the alarm | |
|
| bell icon | disappears. |
|
THE SNOOZE FUNCTION
To use the Snooze function, while the alarm is ringing, press the SNOOZE / LIGHT button to stop the alarm sound and activate the Snooze function.
When the Snooze function is enabled, the Snooze period will last 8 minutes.
NOTE The Snooze function will be disabled if the 
button is pressed.
NOTE When the Snooze function is enabled, the Bell Icon will be flashing.
THE PROJECTOR FUNCTION
The projector displays the time on your ceiling for easy viewing in a darkened room.
ACTIVATING THE PROJECTOR
To turn on the projector:
Press the SNOOZE / LIGHT button to activate the projector for 5 seconds.
OR
Slide the PROJECTION switch to ON to activate continuous projection. However, this function will not work unless the AC/DC adaptor is used.
If the unit is being run on batteries then the PROJECTION ON switch does not need to be on. If you hit the SNOOZE button then the projection will happen anyway.
To deactivate the projection, slide the PROJECTION ON switch to the “off” position.
8