EN
SAFETY AND CARE
SAFETY PRECAUTIONS
Please observe the following safety precautions when setting up and using this product.
•LCD panel - The LCD panel is made of glass, and may break if the unit is dropped.
•Heat sources - Keep the product away from heat sources, such as radiators, stoves, heaters, and other
•Water and moisture - Do not use the product in or near water or in high moisture areas, such as a bathroom.
•Power source - The product may be susceptible to power surges. It should be unplugged during severe storms or whenever you will be away for a long time. Only use the type of power source specified in this manual. Do not overload power strips and extension cords, as this can cause a fire hazard.
CARING FOR THIS PRODUCT
To ensure you receive the maximum benefit from using this product, please observe the following guidelines.
•Do not clean any part of the product with benzene, thinner or other solvent chemicals - this may cause permanent damage that is not covered by the guarantee. When necessary, clean it with a damp cloth.
10
•Keep your product away from hot, humid conditions or strong sunlight.
•Every effort has been made to ensure the highest standards of reliability for your clock with remote motion sensor. However, if something does go wrong, please do not try to repair it yourself - consult your supplier.
•Do not use your product outdoors in the rain, or handle it with wet hands - water can damage electrical equipment.
GETTING STARTED
PACKAGE CONTENTS
When you unpack your clock with remote motion sensor, make sure you keep all the packing materials in a safe place, in case you need to later transport the device or return it for servicing.
In the box, you will find:
•Clock Unit
•Remote Motion Sensor
•4 x
•6V AC / DC Adaptor for the Clock
•3 x
RMR939PA English R5 | 10 | 9/21/04, 2:40 PM |