EN
2.Use the 
or 
buttons to change the type of soothing sound.
3.Press the SOUND / SLEEP button to confirm the setting.
PROJECTION UNIT
The projection unit can display both time and alarm status. To use this feature:
•Slide the PROJECTION switch to ON to activate continuous projection. However, this function will not work unless the AC / DC adaptor is used.
•Adjust the FOCUS knob to make the image clearer.
•Adjust the IMAGE ROTATION knob to rotate the image clockwise or
•Manually tilt the projection unit to position the image or press the 180° ROTATION button to reverse the image and turn it upside down.
NOTE You can also press the SNOOZE / LIGHT button to project the time and alarm status for 5 seconds.
MOTION SENSOR (MSR939A)
The motion sensor has a security / monitoring function. It can set off your motion alarm on the clock for 5 minutes and turn the backlight on for 10 seconds when it detects movement.
Data can be collected from up to 2 sensors. Additional sensor sold separately.
SETUP SENSOR
1.Slide the motion sensor battery door open.
2.Insert the batteries, matching the polarity (+ and
SWITCH | OPTION |
|
|
Channel | Channel |
| than one sensor, select a different |
| channel for each sensor. |
|
|
3.Set the channel by sliding the CHANNEL switch to 1 or 2. The switch is located in the battery compartment.
4.Set the code by sliding the CODE switches to the same setting as the Code on the clock display. This
| enables the clock and motion sensor to interact with |
18 | each other. |
|
RMR939PA English R5 | 18 | 9/21/04, 2:40 PM |