![](/images/new-backgrounds/1289258/28925881x1.webp)
Setting up the DVD player
Important
If the setting is incorrect there will be no sound so be sure to read the manuals of the connected components.
1Move the joystick up or down to select OUTPUT SELECTION in the GEN.
OUTPUT SELECTION is highlighted.
2Click the joystick.
Audio output setting menu is displayed.
3Move the joystick up or down to select the desired audio output setting.
The currently set audio output setting is indi- cated with blue box. The digital output setting selected with the joystick is highlighted.
!48KHz – A 48 kHz signal is output regard- less of the audio sampling frequency. A 96 kHz signal is converted to a 48 kHz signal. (initial setting)
!96KHz – The signal is output with the same frequency as the audio sampling frequency. With a 96kHz signal, you can enjoy excep- tionally high sound quality.
4Click the joystick.
The selected audio output setting is set.
Notes
!With discs featuring 96 kHz recording, if you select 96KHz, audio is not output from digital output.
!With discs that do not feature a CSS (Content Scrambling System) copy guard signal, a 96 kHz digital signal is output.
!When using this unit with a Pioneer multi- channel processor
output when playing discs featuring 96 kHz re- cordings.![](/images/new-backgrounds/1289258/28925881xi5.webp)
Section
10
Setting up the DVD player
En 41