Section
10
Setting up the DVD player
4 Click the joystick.
This enters the code number, and you can now change the level.
#If you input an incorrect code number, the
icon 
is displayed. Press C and input the correct code number.
#If you forget your code number, refer to If you forget your code number on this page.
5Move the joystick left or right to select the desired level.
6Click the joystick.
The parental lock level is set.
Note
Pressing RETURN takes you back to the previous display.
If you forget your code number
Refer to Changing the level on the previous page, and press C 10 times. The registered code number is canceled, letting you register a new one. 
1Move the joystick up or down to select DIGITAL OUTPUT in the GEN.
DIGITAL OUTPUT is highlighted.
2Click the joystick.
Digital output setting menu is displayed.
3Move the joystick up or down to select the desired digital output setting.
The currently set digital output setting is indi- cated with blue box. The digital output setting selected with the joystick is highlighted.
!STREAM – The Dolby Digital signal is out- put as it is (initial setting)
!LPCM – The Dolby Digital signal is con- verted to and output as a linear PCM signal
4Click the joystick.
The selected digital output setting is set.
Notes
!Linear PCM output of DTS audio is not possi- ble. If you select LPCM, DTS audio is not out- put.
!When using an amplifier and decoder that are not Dolby Digital compatible, select LPCM.
Setting for digital output
Set digital output correctly to match the com- ponents you are using with this unit. There is no need to change settings if this unit is not connected for digital output.
!When using this unit with a Pioneer multi- channel processor
STREAM.
Important
Incorrect setting may result in noise and damage to speakers so be sure to read the manuals of the connected components.
Setting digital and analog audio output
You can set linear PCM audio output for both digital and analog output. Set audio output correctly to match the components you are using with this unit.
!When using digital connections, select 48KHz.
!When using analog connections, select 96KHz.
40
En
