NOTE If you use a sensor that collects only temperature data, humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records for the selected sensor. To clear the records, press and hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been cleared.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the Temperature and Humidity readings.
Trend | Rising | Steady | Falling |
ICON
11
BACKLIGHT
Press SNOOZE/LIGHT to activate the backlight for 5 seconds.
RESET SYSTEM
The RESET buttons are located in the battery compartments for the main unit and sensors. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or
NOTE When you press RESET, all settings will return to default value, and you will lose all stored information.
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol- free mild detergent. Avoid dropping the product or placing it in a
EN
RMR603HGA lab test R2 | 11 | 1/17/04, 4:52 PM |